检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王丽萍[1,2] 罗文文 刘思危[1] 张伟 蒋利成 杨仕建 WANG Li-ping;LUO Wen-wen;LIU Si-wei;ZHANG Wei;JIANG Li-cheng;YANG Shi-jian(Chongqing University of Science and Technology,Chongqing 401331,China;Chongqing Key Laboratory of Energy Engineering Mechanics&Disaster Prevention and Mitigation,Chongqing 401331,China)
机构地区:[1]重庆科技学院建筑工程学院,重庆401331 [2]能源工程力学与防灾减灾重庆市重点实验室,重庆401331
出 处:《工程力学》2020年第2期159-167,191,共10页Engineering Mechanics
基 金:国家自然科学基金项目(51808087);重庆市自然科学基金项目(cstc2018jcyjAX0695,cstc2018jcyjAX0052);重庆科技学院校内科研基金项目(CK2016Z14,ck2017zkyb016)
摘 要:钢筋混凝土(RC)框架梁受弯损伤会发生轴向伸长,周边构件(抗侧力构件、现浇板)对梁伸长的约束作用会在梁中产生不可低估的轴力,从而影响梁柱构件和节点的抗震性能以及结构的强震破坏模式。分析了梁中约束轴力对节点抗剪受力机理的影响,设计了6个1/2比例的RC梁柱子结构试件,采用可直接量测约束轴力的等效约束装置代替周边构件对梁伸长的约束作用,通过低周往复加载试验考察了梁轴向约束效应对节点抗剪需求、抗剪承载力以及损伤破坏模式的影响。结果表明,约束轴力对抗剪需求的影响比抗剪承载力的影响明显,梁轴向约束效应产生的轴力较大,且随梁弯曲变形的增大而增加。与无约束试件相比,考虑梁轴向约束效应的试件节点抗剪需求增大了1.14~2.22倍,节点区斜裂缝宽度较大,损伤情况更加严重。Reinforced concrete(RC)beams tend to elongate after flexural cracking and yielding.The elongation is restrained by the surrounding structural components in the RC frame and therefore axial comprehensive force is formed.The seismic performance and failure modes of RC frame joints are affected by the unexpected axial compressive force.The influence of axial restraint force on the shear transfer mechanism of the joints was analyzed.Six 1/2-scale RC beam-column subassemblies,four of which were restrained by an equivalent device,were tested under cyclic loading to study the impacts of the beam elongation on the seismic shear demand,strength and failure modes.The results show that the beam elongation effects on the seismic shear demand were more obvious than those on the strength.The beam elongation caused large compressive axial force in beams with the increase of the beam bending deformation.Compared with the unrestrained specimens,the shear demand of the joints due to the axial restraint force was increased by 1.14~2.22 times.The widths of the inclined cracks in the joint area were larger,and the damage to the joints were relatively more serious in the axially restrained specimens.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28