轴压作用下CFRP加固圆钢管短柱的静力承载力分析  

Static Bearing Capacity Analysis of CFRP-Reinforced Short CHS Steel Tubular Columns under Axial Compression

作　　者：邵永波[1] 朱红梅 杨冬平 SHAO Yongbo;ZHU Hongmei;YANG Dongping(School of Mechatronic Engineering,Southwest Petroleum University,Chengdu 610500,China;Technology Inspection Center,China Petroleum&Chemical Corporation,Dongying 257062,China)

机构地区：[1]西南石油大学机电工程学院,四川成都610500 [2]中石化胜利油田分公司技术检测中心,山东东营257062

出　　处：《西南交通大学学报》2020年第1期167-174,共8页Journal of Southwest Jiaotong University

基　　金：国家重点研发计划(2016YFC0802305);四川省青年科技创新团队项目(2019JDTD0017)

摘　　要：为了研究轴压作用下碳纤维增强复合材料(carbon fibre-reinforced polymer,CFRP)加固圆形空心截面(circular hollow section,CHS)钢管短柱的极限承载力,对轴压作用下CFRP加固CHS钢管短柱进行了理论和数值分析.理论分析中,利用等效截面法推导了两种不同粘贴方式(全环向粘贴以及环向和纵向交替粘贴)的CFRP加固圆钢管短柱在轴压作用下静力承载力的理论计算公式;数值分析中,将特征值屈曲与Riks法相结合建立了轴压作用下CFRP加固圆钢管短柱的非线性有限元分析模型.对该模型中的环向和纵向CFRP进行应力分析后发现,环向CFRP处于拉伸状态,约束钢管的径向变形;纵向CFRP会承担轴压荷载中的部分压力,限制钢管的变形.最后,将所建立的有限元分析模型结果和所推导的理论公式结果与已有文献的试验结果进行对比,发现三者之间的最大误差不超过2%,验证了建立的有限元模型和所推导的理论公式分析结果的准确性.To predict the ultimate strength of a short circular hollow section(CHS)steel tubular columns reinforced with carbon fibre-reinforced polymer(CFRP),both theoretical and numerical analyses were carried out.In the theoretical analysis,based on equivalent section method,the equations for calculating the load bearing capacities of CHS steel tubular columns under axial compression are deduced,which correspond to two different reinforcing methods,in which CFRPs are arranged in circumferential placement and in longitudinalcircumferential placement.In the numerical analysis,both eigenvalue buckling method and Riks method are combined to build a nonlinear finite element model of the tubular columns under axial compression.The finite element analysis for the stress distribution of the longitudinal and circumferential CFRPs shows that the circumferential CFRPs are under tension and restrain the radial deformation of the tubular columns,while the longitudinal CFRPs share the axial compression and restrain the deformation of the tubular columns.The comparison of the numerical results,theoretical results and reported experimental results show that the maximum deviation among them is no more than 2%,which verifies the finite element model and deduced equations.

关 键 词：CFRP加固圆钢管短柱 轴压作用 静力承载力 等效截面法 有限元分析 

分 类 号：TE58[石油与天然气工程—油气田开发工程]