一种新吸收剂性能检测及探究  

Testing Report on Properties of Desulfurization Absorbent

作　　者：潘佳宁 褚雅志[1] Pan Jianing;Chu Yazhi(Northwest University,Xi’an 710069,China)

机构地区：[1]西北大学

出　　处：《中国资源综合利用》2020年第1期28-31,共4页China Resources Comprehensive Utilization

摘　　要：本文以撬装式多功能装置为基础,使用特殊吸收剂对SO2吸收解吸试验进行研究,旨在测定脱硫吸收剂的试剂性能。其中测定的主要参数有吸收剂流率、吸收塔温度、SO2浓度脱硫率。结果表明,吸收塔温度低于50℃时,吸收剂流率降至0.06 kg/m3,仍能达到脱硫率100%的效果;但当温度高于55℃时,吸收剂流率需要不低于0.15 kg/m3,脱硫率可稳定达到100%。经试验分析和数据对比,该吸收剂性能优良,具有一定的使用价值。Based on a skid-mounted multifunctional experimental device,this paper uses a special absorbent to study the SO2 absorption and desorption test in order to determine the reagent performance of the desulfurization absorbent.The main parameters measured are the flow rate of absorbent,temperature of absorption tower,and desulfurization rate of SO2 concentration.The results show that when the temperature of the absorption tower is lower than 50℃,the flow rate of the absorbent drops to 0.06 kg/m3,and the effect of 100%desulfurization can still be achieved;but when the temperature is higher than 55℃,the flow rate of the absorbent needs to be not lower than 0.15 kg/m3,the desulfurization rate can reach 100%.The test analysis and data comparison show that the absorbent has excellent performance and has certain use value.

关 键 词：撬装置 吸收 解吸 吸收剂性能 

分 类 号：R852[医药卫生—航空、航天与航海医学]