平顶飞秒激光经圆锥透镜在熔融石英中成丝及超连续辐射  

Filamentation and supercontinuum emission generated from flattened femtosecond laser beam by use of axicon in fused silica

作　　者：付丽丽 常峻巍 陈佳琪 张兰芝 郝作强[1,2] Fu Li-Li;Chang Jun-Wei;Chen Jia-Qi;Zhang Lan-Zhi;Hao Zuo-Qiang(School of Science,Changchun University of Science and Technology,Changchun 130022,China;Shandong Provincial Engineering and Technical Center of Light Manipulations&Shandong Provincial Key Laboratory of Optics and Photonic Device,School of Physics and Electronics,Shandong Normal University,Jinan 250358,China)

机构地区：[1]长春理工大学理学院,长春130022 [2]山东师范大学物理与电子科学学院,山东省光学与光子器件技术重点实验室,山东省光场调控及应用工程技术研究中心,济南250358

出　　处：《物理学报》2020年第4期110-114,共5页Acta Physica Sinica

基　　金：国家自然科学基金(批准号:11774038,11474039,11274053);山东省泰山学者建设工程资助的课题~~

摘　　要：实验研究了平顶飞秒激光经圆锥透镜后在熔融石英中的成丝及超连续辐射.与高斯飞秒激光的成丝对比发现,平顶飞秒激光可以获得在圆锥透镜焦深区域内强度分布更为均匀的等离子体细丝,这一特征更有利于飞秒激光在固体介质中进行微纳加工等领域的应用.并且,在不损伤熔融石英的条件下,平顶飞秒激光成丝可以获得更高能量、更高转换效率的超连续辐射,这是因为若产生光强相近的细丝,平顶飞秒激光所需的初始激光能量更高,此激光能量下产生的细丝长度更长、均匀性更好.It is important to control the femtosecond laser filamentation and the supercontinuum(SC)for their potential applications.The use of axicon is beneficial to the filamentation elongation and SC enhancement,because the axicon can convert the incident laser into a Bessel beam and forms a unique longer depth of focus region.On the other hand,the flattened laser beam which has a uniform distribution of the beam intensity,can propagate in condense media with a higher incident energy than that of Gaussian laser beam.It has unique advantages in forming a SC with high energy and high conversion efficiency.In this paper,we combine the use of axicon and the flattened laser beam to form filament and SC in fused silica.First,we study the filamentation generated by the Gaussian beam and the flattened beam,respectively,with the same incident pulse energy(672μJ).The results show that the flattened beam can generate filament with relative uniform intensity distribution in the focal depth of the axicon and the intensity is relatively smaller than that of the Gaussian beam.It suggests that the flattened laser beam can propagate in fused silica with a higher energy than Gaussian beam.Second,we study the filamentation of the flattened beam of 1.319 mJ.In this case,the filament intensity is close to that of the Gaussian beam with 672μJ.Moreover,the filamentation of the flattened beam with 1.319 mJ is longer and the intensity distribution is more uniform than that of the Gaussian beam with 672μJ.Therefore,a flattened laser beam can generate the SC with a higher energy than that of the Gaussian beam in fused silica.The comparison of the spectra shows that the relative spectral intensity of flattened beam with 1.319 mJ in the range of 550–700 nm is much higher than that of the Gaussian beam with 672μJ.The conversion efficiency of the Gaussian beam and the flattened beam is 32.58%and 39.59%,respectively.It can be seen that the flattened laser beam has advantages not only in generating long and uniform filament,but also in generating

关 键 词：飞秒激光成丝 平顶光束 圆锥透镜 超连续辐射 

分 类 号：TN24[电子电信—物理电子学] O437[机械工程—光学工程]