基于分数比可饱和脉冲变压器的全固态脉冲驱动源初步研究  

Preliminary study on all-solid state long pulse generator based on fractional-turn ratio saturable pulse transformer

作　　者：陈绒 杨建华[1,2] 程新兵[1,2] 钱宝良[1] Chen Rong;Yang Jianhua;Cheng Xinbing;Qian Baoliang(College of Advanced Interdisciplinary Studies,National University of Defense Technology,Changsha 410073,China;State Key Laboratory of Pulsed Power Laser Technology,National University of Defense Technology,Hefei 230031,China)

机构地区：[1]国防科技大学前沿交叉学科学院,长沙410073 [2]国防科技大学脉冲功率激光技术国家重点实验室,合肥230031

出　　处：《强激光与粒子束》2020年第2期46-51,共6页High Power Laser and Particle Beams

基　　金：国家自然科学基金项目（51707198,51641707,51477177）

摘　　要：设计了一台基于分数比可饱和脉冲变压器的全固态脉冲驱动源,其核心部件为分数比可饱和脉冲变压器,用来实现固态磁开关、脉冲调制、电压升压等功能,再借助Marx技术、磁开关技术和反谐振网络调制技术建立全固态脉冲驱动源,初步实验结果表明当直流电源提供100 V的充电电压时,该全固态脉冲驱动源可输出14.4 kV左右的准方波信号,脉宽约194 ns,验证了该技术方案实现输出百纳秒准方波信号的可行性,为建立百MW长脉冲信号输出的全固态脉冲驱动源模块提供了设计思路。This paper presents the design of an all-solid state pulse generator based on a fractional-turn ratio saturable pulse transformer which,as the key component,takes the roles of magnetic switch,pulse forming device,voltage boosting device,etc.Preliminary experimental results show that a quasi-square pulse with the amplitude of 14.4 kV and the pulse width of 194 ns are obtained while the DC voltage source supply is 100 V.Hence,it is feasible to apply this technology to construct a generator outputting pulses with the pulse width of several hundred nanoseconds.This study can provide a guidance to construct a MW level solid state pulse generator module.

关 键 词：全固态脉冲驱动源 分数比可饱和脉冲变压器 Marx技术 磁开关技术 反谐振网络调制技术 

分 类 号：TN782[电子电信—电路与系统]