Cu-Cr-Zr合金高温热变形行为  

High temperature thermal deformation behavior of Cu-Cr-Zr alloy

作　　者：陈莹 党淑娥[1] 马玉霞[1] 朱雪彤 霍雄勃 Chen Ying;Dang Shu'e;Ma Yuxia;Zhu Xuetong;Huo Xiongbo(College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China)

机构地区：[1]太原科技大学材料科学与工程学院

出　　处：《锻压技术》2020年第2期198-202,共5页Forging & Stamping Technology

基　　金：山西省科技重大专项(20181101002);山西省重点学科建设经费资助

摘　　要：为研究Cu-Cr-Zr合金的高温热变形行为,建立Cu-Cr-Zr合金的高温本构模型,采用Gleeble-1500D热模拟实验机对该合金进行不同变形条件下的热压缩实验。实验参数为:变形量60%、应变速率0. 1~5 s-1、变形温度650~900℃。实验结果表明:变形初始阶段加工硬化大于动态软化作用,使得应力值迅速增大至峰值,之后动态软化大于加工硬化作用,使得应力值降低至一定程度再趋于平稳。通过对Cu-Cr-Zr合金应力-应变曲线的变化规律进行分析可得,低应变速率和高变形温度都会促进合金动态再结晶的程度。利用计算软件对实验数据进行计算和整理,将由线性拟合所得数值代入Arrhenius本构模型,可得Cu-Cr-Zr合金的本构模型。In order to study the high temperature thermal deformation behavior of Cu-Cr-Zr alloy,the high temperature constitutive model of Cu-Cr-Zr alloy was established,and the thermal compression experiments under different deformation conditions were conducted by Gleeble-1500 D thermal simulator. The experimental parameters were the deformation amount of 60%,the strain rate of 0. 1-5 s-1,and the deformation temperature of 650-900 ℃ . The experiment results show that the work hardening effect is greater than the dynamic softening effect in the initial stage of deformation,so that the stress value increases rapidly to the peak value,then the dynamic softening effect is greater than the work hardening effect,so that the stress value decreases to a certain extent and then stabilizes. By analyzing the variation of stress-strain curve for Cu-Cr-Zr alloy,the low strain rate and the high deformation temperature promote the degree of dynamic recrystallization for alloy. Furthermore,the experimental data is calculated and sorted by calculation software,and the constitutive model of Cu-Cr-Zr alloy is obtained by substituting the linearly fitted value into the Arrhenius constitutive model.

关 键 词：CU-CR-ZR合金 热压缩实验 本构模型 动态再结晶 动态软化 加工硬化 

分 类 号：TG316[金属学及工艺—金属压力加工]