建设工程竣工验收中房屋结构安全检测方法  

Safety Inspection method of Building Structure in Construction Project Completion and Acceptance

作　　者：张松镇 ZHANG Songzhen(Xiamen Haicang Municipal Construction Management Center, Xiamen Fujian 361116, China)

机构地区：[1]厦门海沧市政建设管理中心

出　　处：《北京测绘》2020年第2期277-281,共5页Beijing Surveying and Mapping

摘　　要：在房屋安全结构检测时,传统安全检测方法准确性低。故此提出城市规划竣工验收中房屋结构安全检测方法。显微观察计算出气泡频数、体积大小后,识别气泡的射线强度图像,预测出腐蚀发生的位置。进行腐蚀速率数据分析计算出腐蚀速率,得出房屋结构的实际结构参数,确定房屋安全情况。对传统检测方法与本文提出的安全检测方法进行仿真实验。实验结果表明城市规划竣工验收中房屋结构安全检测方法比传统安全检测方法准确性要高出10%左右。本文研究的房屋结构安全检测方法弥补了传统方法数据不准确,为房屋结构安全检测方法提供了新思路。In the detection of building safety structure,the accuracy of traditional safety detection methods is low.Therefore,this paper puts forward the method of building structural safety detection in the acceptance and acceptance of urban planning completion.After calculating the frequency and volume of bubbles by microscopic observation,the ray intensity image of bubbles was identified and the location of corrosion was predicted.Corrosion rate data analysis was carried out to calculate the corrosion rate,and the actual structural parameters of the building structure were obtained to determine the safety situation of the building.The traditional detection method and the security detection method proposed in this paper are simulated.The experimental results show that the accuracy of building structure safety detection method in urban planning acceptance is about 10%higher than that of traditional safety detection method.The method studied in this paper makes up for the inaccurate data of traditional methods,and provides a new idea for the method of building structure safety detection.

关 键 词：城市规划 竣工验收 房屋结构 检测方法 

分 类 号：TN957[电子电信—信号与信息处理] P258[电子电信—信息与通信工程]