检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:崔焱茗 张立[1] 黄龙[1] 刘涛[1] 梁艳 吴厚平[1] 熊湘君[1] CUI Yanming;ZHANG Li;HUANG Long;LIU Tao;LIANG Yan;WU Houping;XIONG Xiangjun(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China)
机构地区:[1]中南大学粉末冶金国家重点实验室
出 处:《粉末冶金材料科学与工程》2020年第1期58-64,共7页Materials Science and Engineering of Powder Metallurgy
基 金:湖南省自然科学基金资助项目(2019JJ40373);国家自然科学基金资助项目(51574292);粉末冶金国家重点实验室资助项目(2019zzkt05)
摘 要:分别以Ti(C0.4,N0.6),Ti(C0.5,N0.5)和Ti(C0.7,N0.3)等3种TiCN粉末为原料,制备TiCN-25WC-10TaC-2Mo2C-7Ni-7Co金属陶瓷,研究TiCN原料中C/N原子比对TiCN基金属陶瓷组织结构、硬度、抗弯强度、韧性、磁学性能以及耐腐蚀性能的影响。结果表明,以Ti(C0.4,N0.6)为原料制备的TiCN基金属陶瓷中出现M6C型脱碳相(η相),导致材料的抗弯强度和韧性显著降低。以Ti(C0.7,N0.3)为原料制备的金属陶瓷为典型的弱芯环结构,具有最佳的力学性能,硬度(HV30)、抗弯强度和Palmqvist韧性分别为15.61 GPa,2294 MPa和11.29 MN·m^–3/2。随TiCN原料中C/N原子比降低,金属陶瓷的矫顽磁力和相对磁饱和均大幅降低。在pH=1的H2SO4溶液中的电化学腐蚀实验结果表明,采用Ti(C0.4,N0.6)和Ti(C0.5,N0.5)原料制备的金属陶瓷的耐腐蚀性能相近,采用Ti(C0.7,N0.3)原料制备的金属陶瓷的耐腐蚀性能显著降低。Three kinds of TiCN-25WC-10TaC-2Mo2C-7Ni-7Co cermets were prepared from TiCN powders with different C/N ratio,i.e.,Ti(C0.4,N0.6),Ti(C0.5,N0.5)and Ti(C0.7,N0.3).The effects of C/N atomic ratio on the microstructure,hardness,transverse rupture strength,Palmqvist toughness,magnetic properties and corrosion resistance of TiCN-based cermets were investigated.The observation and analysis results show that there is a M6C type decarburization phase(ηphase)in the cermet with Ti(C0.4,N0.6)as the raw material,which results in a substantially decrease in transverse rupture strength and toughness.Microstructure of the cermet prepared from Ti(C0.7,N0.3)raw material shows a typical weak core-rim structure,which is accompanied by the best mechanical properties,i.e.,15.61 GPa for HV30,2294 MPa for transverse rupture strength and 11.29 MN·m^–3/2 for Palmqvist toughness.With the decrease of C/N ratio in the TiCN raw material,the coercivity force and relative magnetic saturation of cermet decrease rapidly.The results of electrochemical corrosion experiments in H2SO4 solution with pH=1 show that the corrosion resistance of cermets prepared from Ti(C0.4,N0.6)and Ti(C0.5,N0.5)is similar,and the corrosion resistance of cermets prepared from Ti(C0.7,N0.3)is significantly decreased.
关 键 词:TiCN基金属陶瓷 C/N原子比 微观组织结构 力学性能 磁学性能 电化学腐蚀
分 类 号:TG178[金属学及工艺—金属表面处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229