检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:娄荣 陈威文 钟振[2,3] 周卫东 张鑫 王艳丽 杨熙华 LOU Rong;CHEN Wei-wen;ZHONG Zhen;ZHOU Wei-dong;ZHANG Xin;WANG Yan-li;YANG Xi-hua(Huahui Engineering Design Group Corporation Ltd.,Shaoxing 312000,Zhejiang,China;Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province,Shaoxing University,Shaoxing 312000,Zhejiang,China;Center of Rock Mechanics and Geohazards,Shaoxing University,Shaoxing 312000,Zhejiang,China)
机构地区:[1]华汇工程设计集团股份有限公司,浙江绍兴312000 [2]绍兴文理学院浙江省岩石力学与地质灾害重点实验室,浙江绍兴312000 [3]绍兴文理学院岩石力学与地质灾害实验中心,浙江绍兴312000
出 处:《工程爆破》2020年第1期15-20,共6页Engineering Blasting
基 金:国家自然科学基金资助项目(51509154,41572299);浙江省自然科学基金资助项目(LGJ20E090001);浙江省科技厅公益技术研究资助项目(No.2015C31134);绍兴市科技计划资助项目(2018A21010);绍兴文理学院国际科技合作资助项目(2019LGGH1008)
摘 要:建筑基坑内支撑的拆除是影响施工进度的重要因素之一。为提高施工效率,提出一种在钢筋混凝土支撑梁内部沿着梁轴线预埋大直径孔道进行静态破碎的拆除方案。在此基础上,通过扩展有限元方法(ExtendedFiniteElementMethod,XFEM)建立含预埋静态破碎孔(孔径为90mm)的钢筋混凝土梁(截面尺寸为500mm ×500mm)模型,并对其在静态膨胀压力作用下的破碎及裂缝扩展过程进行了模拟分析。模拟结果表明:内支撑梁的静态破碎过程可分为弹性变形、裂缝稳定扩展和裂缝失稳扩展3个阶段;基于虚拟闭合技术,进一步计算得到了复合开裂模式下的应变能释放率,计算结果显示:裂缝扩展以Ⅰ型裂缝为主,当膨胀压力达到19.4MPa时,可实现破碎钢筋混凝土内支撑梁的目的。Demolition of strut for building excavation is the main concerns of engineering construction.In order to improve efficiency of demolition,we introduce a static cracking scheme for strut with a large diameter hole embedded along its axis.Based on extended finite element method,the process of fracture and crack propagation of reinforced concrete beam(500 mm×500 mm in section size)with an embedded hole(90 mm in diameter)under static expansion pressure is simulated.The simulation results show that the static fracture process of the internal braced beam can be divided into three stages:elastic deformation,stable crack propagation and unstable crack propagation.The strain energy release rate of the composite crack mode is further calculated by virtual closure technology.The calculated strain energy release rate show that the crack propagation is mainly type I crack,and the static cracking of strut could be achieved under expansione pressure of 19.4 MPa.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33