机构地区:[1]School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China [2]State Key Laboratory of Tribology,Tsinghua University,Beijing 100084,China
出 处:《Chinese Physics B》2020年第2期321-326,共6页中国物理B(英文版)
基 金:Project supported by the National Natural Science Foundation of China(Grant No.51905032);the National Key Research and Development Program of China(Grant No.2018YFC0810500);the Fundamental Research Funds for the Central Universities,China(Grant No.FRF-TP-18-012A2).
摘 要:The influence rules of square micro-pillar array porosity on the liquid motion characteristics of the near-surface layer are investigated by quartz crystal microbalance(QCM).QCM is a powerful and promising technique in studying the interfacial behavior,which exhibits great advantages in investigating the effects of surface microstructure,roughness,and array.In our experiments,three different arrays with the same height of about 280 nm and center distance of 200μm,but different diameters of about 78μm,139μm,and 179μm are investigated.The results indicate that when the surface array has a large porosity,its influence on the liquid motion of the near surface layer is slight,thus resulting in a small increase of half-bandwidth variation due to the additional friction energy dissipation.When the surface array has a small porosity,the array tends to make the liquid film trapped in the array oscillating with the substrate,then there may be a layer of liquid film behaving like rigid film,and it also will make the liquid motion near the array layer more complicated.Thus for the#3 surface with a small porosity,both the absolute values of frequency shift|Δf3|and half-bandwidth variationΔΓ3 increase obviously.The experimental results show good consistence with the theoretical model of Daikhin and Urbakh.This study sheds light on understanding the influence mechanism of surface array porosity on the liquid motion of near-surface layer.The influence rules of square micro-pillar array porosity on the liquid motion characteristics of the near-surface layer are investigated by quartz crystal microbalance(QCM).QCM is a powerful and promising technique in studying the interfacial behavior,which exhibits great advantages in investigating the effects of surface microstructure,roughness,and array.In our experiments,three different arrays with the same height of about 280 nm and center distance of 200 μm,but different diameters of about 78 μm,139 μm,and 179 μm are investigated.The results indicate that when the surface array has a large porosity,its influence on the liquid motion of the near surface layer is slight,thus resulting in a small increase of half-bandwidth variation due to the additional friction energy dissipation.When the surface array has a small porosity,the array tends to make the liquid film trapped in the array oscillating with the substrate,then there may be a layer of liquid film behaving like rigid film,and it also will make the liquid motion near the array layer more complicated.Thus for the#3 surface with a small porosity,both the absolute values of frequency shift |△f3| and half-bandwidth variation △Γ3 increase obviously.The experimental results show good consistence with the theoretical model of Daikhin and Urbakh.This study sheds light on understanding the influence mechanism of surface array porosity on the liquid motion of near-surface layer.
关 键 词:quartz crystal MICROBALANCE SQUARE micro-pillar ARRAY WETTING state permeability
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...