热连轧精轧机工作辊表面质量问题分析与改进  

Analysis and Improvement of Surface Quality of Finishing Mill Working Roll

作　　者：饶静[1] 杨立庆[1] 王超海[1] 闫宁 李坤 Rao Jing;Yang Liqing;Wang Chaohai;Yan Ning;Li Kun(Anyang Iron and Steel Co.,Ltd,Anyang,China,455004)

机构地区：[1]安阳钢铁股份有限公司

出　　处：《特钢技术》2019年第4期56-59,共4页Special Steel Technology

摘　　要：针对安钢1780mm热连轧机组带钢表面横纹缺陷进行调查分析,结果表明:带钢表面横纹缺陷并非带钢屈服产生的褶皱,而是轧辊磨削不良造成的辊面横纹和轧辊转车时产生的辊面振纹,采取相应的改进措施,带钢表面横纹消除,效果良好。Aiming at the horizontal striations defect on the surface of the hot rolled strip in 1780 mm hot strip mill in Anyang company, a series of investigations and analyses were carried out. The results showed that horizontal striations of steel strip was not that the strip yield the folds, but the horizontal striations of the roller surface caused by the poor roller grinding, and the vibration striations of the roller surface caused by the roller rotating, corresponding improving measures are taken, the strip surface to eliminate cross striations and the result was good.

关 键 词：热轧带钢 表面横纹 分析与改进 

分 类 号：TG333.17[金属学及工艺—金属压力加工]