基于相移光纤光栅传感器的碳纤维增强树脂复合材料基体裂纹超声探伤  被引量:4

Ultrasonic damage detection of matrix cracks in carbon fiber reinforced polymer composites using phase-shifted fiber Bragg grating sensor

在线阅读下载全文

作  者:冀建宇 王容[1] 吴奇[1,2] 熊克 JI Jianyu;WANG Rong;WU Qi;XIONG Ke(State Key Laboratory of Mechanics and Control of Mechanical Structures,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;Institute of Industrial Science,The University of Tokyo,Tokyo 1538505,Japan)

机构地区:[1]南京航空航天大学机械结构力学及控制国家重点实验室,南京210016 [2]日本东京大学生产技术研究所,东京1538505

出  处:《复合材料学报》2020年第1期113-120,共8页Acta Materiae Compositae Sinica

基  金:国家自然科学基金(51605224);机械结构力学及控制国家重点实验室自主研究课题(0516G02)。

摘  要:复合材料内部的微小裂纹常会引起后续严重的破坏,因此需要对其进行检测。然而超声探伤复合材料基体裂纹非常困难。本文搭建了一个具有高灵敏度、大带宽的相移光纤光栅超声传感系统,利用此系统探测了在正交铺层碳纤维增强树脂复合材料板中传播的Lamb波。对Lamb波进行数据处理发现,随着三点弯曲实验产生的基体裂纹个数增加,Lamb波的幅值和频谱峰值线性减少。通过和传统压电传感器比较表明,相移光纤光栅传感器测得的Lamb波信号随复合材料基体裂纹数的增加其幅值具有更高的下降速率,表明相移光纤光栅传感器更适合于复合材料基体裂纹的超声探伤。研究表明,新开发的传感系统能够探测到中心频率为300kHz的微弱超声信号,并能够对碳纤维增强树脂复合材料板中微小基体裂纹个数进行精确评估。Micro damage in composites usually leads to catastrophic failures in the following applications and therefore needs to be detected.However,it is difficult to detect transverse cracks in composite laminates by using ultrasonic nondestructive testing.In this research,a highly-sensitive and broad bandwidth phase-shifted fiber Bragg grating ultrasonic sensing system was developed and applied to detect Lamb wave propagating in a cross-ply carbon fiber reinforced polymer composites.After conducting data process on the detected Lamb wave,it is found that along the increase of crack numbers induced by the standard three-point bending test,the amplitude of the waveform and the peak value of the spectrum both linearly decrease.After compared with conventional lead-zirconate-titanate sensor,all research results demonstrate that the Lamb wave detected by phase-shifted fiber Bragg grating sensor shows a higher declining rate when the number of matrix cracks increase.Thus,the novel optical-fiber-based sensor succeeds in detection of weak ultrasonic signals with middle frequency of 300 kHz,and can precisely evaluate the micro transverse cracks in composite laminate.

关 键 词:碳纤维增强树脂 复合材料 基体裂纹 相移光纤光栅 超声检测 LAMB波 

分 类 号:TB332[一般工业技术—材料科学与工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象