硅灰石与纳米MoS2对丙烯酸酯橡胶摩擦磨损性能的影响  

Effects of Wollastonite and Nano-MoS2 on Friction and Wear Properties of Acrylate Rubber

作　　者：文映 魏刚[1] 邹兴平 叶梅 刘燕 谢强 WEN Ying;WEI Gang;ZOU Xing-ping;YE Mei;LIU Yan;XIE Qiang(College of Material Science&Engineering,Xihua University,Chengdu 610039,China;Chengdu Shengbang Seals Co.,Ltd.,Chengdu 610200,China)

机构地区：[1]西华大学材料科学与工程学院,四川成都610039 [2]成都盛帮密封件股份有限公司,四川成都610200

出　　处：《塑料工业》2020年第2期144-149,共6页China Plastics Industry

基　　金：西华大学重点基金项目资助(zg0720108)。

摘　　要：采用无转子硫化仪、环-块式摩擦试验机、电子和光学显微镜等分析表征手段,考察了硅灰石及其与纳米二硫化钼(MoS2)并用对丙烯酸酯橡胶(ACM)摩擦磨损性能的影响。结果表明,随着硅灰石用量的增加,改性ACM硫化胶的摩擦因数逐渐降低,而磨损体积呈现出先降低后升高的趋势;当硅灰石用量为35 phr时,硫化胶具有较小的摩擦因数和最好的耐磨性。在35 phr硅灰石改性ACM基础上添加1 phr纳米MoS2时,硫化胶的摩擦因数和磨损体积分别下降到0.4和1.54 mm3,表现出最低的摩擦因数和磨损体积,同时还保持较好的硫化和力学性能。纳米MoS2与硅灰石并用改性ACM时,硫化胶表现出轻微的磨粒磨损特征,磨损面平整光滑,形成的转移膜薄且完整均匀。The influence of wollastonite powders with nano-scale molybdenum disulfide(MoS2)on friction and wear properties of polyacrylate rubber was investigated by means of rotor-less vulcanizer,ring-block type tribo-test machine,electron and optical microscopes,et al.The results showthat the friction coefficient of modified vulcanizated acrylic rubber gradually decreases with the increasing of wollastonite contents,however,its wear volume has a trend of decreasing first and then increasing.When wollastonite content is 35 phr,the vulcanized rubber has a smaller friction coefficient and the best wear resistance.When adding 1 phr nano-MoS2 into35 phr wollastonite-modified acrylate rubber,the friction coefficient and wear volume of vulcanizate decrease to 0.4 and 1.54 mm3,respectively,showing the lowest friction coefficient and wear amount.And it also maintains a good vulcanization and mechanical properties.When nano-MoS2 and wollastonite are used to modify ACM,vulcanizate shows slight abrasive wear characteristic.The worn surface is flat and smooth,and its transfer film is thin and uniform.

关 键 词：丙烯酸酯橡胶 硅灰石 纳米二硫化钼 摩擦磨损 

分 类 号：TQ325.7[化学工程—合成树脂塑料工业]