基于SolidWorks流固耦合对闸阀阀体结构分析和优化  

Analysis and Optimization of Gate Valve Body Structure Based on SolidWorks Fluid-solid Coupling

作　　者：张家振 王洪申[1] 夏崇茅 张小鹏 丁文义 ZHANG Jiazhen;WANG Hongshen;XIA Chongmao;ZHANG Xiaopeng;DING Wenyi(School of Mechanical and Electrical Engineering,Lanzhou University of Technology,Lanzhou 730050,China;Zhejiang Weidouli Valve Manufacturing Co.,Ltd.,Wenzhou 325024,China)

机构地区：[1]兰州理工大学机电工程学院,甘肃兰州730050 [2]浙江维都利阀门制造有限公司,浙江温州325024

出　　处：《机械制造与自动化》2020年第1期97-100,133,共5页Machine Building & Automation

摘　　要：对闸阀阀体结构强度进行分析,使用SolidWorws三维软件生成闸阀阀体的三维模型,运用Simulation模块直接对阀体进行结构分析,得出阀体的受力状态;再利用流固耦合的方法对阀体进行结构分析,分别对两种方法进行优化分析。结果表明,流固耦合方法的最大应力更小,优化裕量更大。This paper analyzes the structural strength of the gate valve body and uses SolidWorks software to establish its threedimensional model.The structure of the valve body is directly analyzed by the Simulation module,and its force state is obtained.Then,its structural analysis is carried out with fluid-solid coupling method.The result shows that the stress analyzed by using the fluid-solid coupling method is less and the optimization margin is larger.

关 键 词：SOLIDWORKS 结构分析 流固耦合 优化 

分 类 号：TP391.9[自动化与计算机技术—计算机应用技术]