满足静水性要求的Jackson潜艇船型  

Jackson Submarine Hull Complying with Hydrostatic Regulations

作　　者：齐翔 唐晓[2] 齐欢[3,4] QI Xiang;TANG Xiao;QI Huan(China Ship Research and Design Center,Wuhan 430064,China;Early Warming Institute of Air Force,Wuhan 430012,China;Naval University of Engineering,PLA,Wuhan 430032,China;Wuchang Shouyi University,Wuhan 430064,China)

机构地区：[1]中国舰船设计研究中心,湖北武汉430064 [2]空军预警学院,湖北武汉430012 [3]海军工程大学,湖北武汉430032 [4]武昌首义学院,湖北武汉430064

出　　处：《船舶与海洋工程》2020年第1期8-11,25,共5页Naval Architecture and Ocean Engineering

基　　金：国家自然科学基金(61364025);湖北省自然科学基金(2017CFC805)。

摘　　要：分析Jackson潜艇线型控制方程的几种表现模型形式,其中:2个形状因子的模型可利用设计要求中的排水体积与浮心纵坐标的联立方程组获得;其他针对2个形状因子的模型可利用优化方法获得。通过实例验证该方法的可行性。结果表明,该方法可用于建立数学线型,进而用于多学科设计优化。This paper analyzes several representation models of control equation for Jackson submarine hull,where two of the shape factors can be obtained by solving a set of simultaneous equations for the required displacement volume and longitudinal center of buoyancy,while the other two can be obtained through an optimization method.The feasibility of the method is validated by a practical example.The result shows that the method can be used to establish the mathematical hull lines,and can be further used for multi-disciplinary design optimization.

关 键 词：Jackson线型控制方程 潜艇外形 静水性条件 SUBOFF潜艇模型 优化方法 

分 类 号：U662.2[交通运输工程—船舶及航道工程] U674.941[交通运输工程—船舶与海洋工程]