退火对AZ31镁合金微观组织和力学各向异性的影响  

Effect of Annealing on Microstructure and Mechanical Anisotropy of AZ31 Magnesium Alloy

作　　者：李线绒[1,2] 米玉洁 聂慧慧 王韬略[1,2] 梁伟 Li Xianrong;Mi Yujie;Nie Huihui;Wang Taolve;Liang Wei(Taiyuan University of Technology,Taiyuan 030024,China;Shanxi Key Laboratory of Advanced Magnesium-based Materials,Taiyuan University of Technology,Taiyuan 030024,China)

机构地区：[1]太原理工大学,山西太原030024 [2]先进镁基材料山西省重点实验室,山西太原030024

出　　处：《稀有金属材料与工程》2020年第1期320-324,共5页Rare Metal Materials and Engineering

基　　金：山西省重大专项项目(20181101008);山西省应用基础面上青年基金项目(201801D221101);国家自然科学基金(U1710254,51175363、51274149);山西能源学院院基金(ZY-2017003)。

摘　　要：对AZ31镁合金进行轧制并对轧制后的板材进行退火。采用OM、SEM及EBSD观察并分析了轧制及退火态镁合金的微观形貌及取向状态,分析退火对各向异性的影响。结果表明:轧制后镁合金存在着明显的各向异性,经退火后,镁合金不同取向的基面织构强度差异减小,其抗拉强度、屈服强度尤其在延伸率方面的各向异性指数远小于轧制态下的各向异性指数,说明退火可以改善镁合金的各向异性。AZ31 magnesium alloy was rolled and annealed after rolling.The microstructure and orientation of magnesium plate in as-rolled state and annealed state were studied,and the effect of annealing on anisotropy was analyzed.The results show that rolled magnesium alloys are anisotropic visibly and the difference of texture strength between different orientations of magnesium alloys decreases after annealing.The tensile strength,yield strength and elongation anisotropy index of annealed state magnesium plate are smaller than those of rolled-state magnesium,especially in elongation,which displays that annealing can improve the anisotropy of Mg alloys.

关 键 词：镁合金 各向异性 退火 

分 类 号：TG146.22[一般工业技术—材料科学与工程]