多级A/O+生物脱氮技术处理高浓度制药废水  

Treatment of High Concentration Pharmaceutical Wastewater by Multistage A/O and Biological Nitrogen Removal Technology

作　　者：沈浙萍[1] 余志龙 茅宏 易利芳 孔令为[1] 张敏东[1] 梅荣武[1] SHEN Zhe-ping;YU Zhi-long;MAO Hong;YI Li-fang;KONG Ling-wei;ZHANG Min-dong;MEI Rong-wu(Environmental Science Research and Design Institute of Zhejiang Province,Hangzhou 310007,China;Zhejiang Jinhua CONBA Pharmaceutical Co.Ltd.,Jinhua 321000,China;Zhejiang Hongcheng Environmental Engineering Co.Ltd.,Hangzhou 310007,China)

机构地区：[1]浙江省环境保护科学设计研究院,浙江杭州310007 [2]浙江金华康恩贝生物制药有限公司,浙江金华321000 [3]浙江宏澄环境工程有限公司,浙江杭州310007

出　　处：《中国给水排水》2020年第4期100-105,共6页China Water & Wastewater

基　　金：国家水体污染控制与治理科技重大专项(2017ZX07206-002);浙江省科技计划项目(2018C03006)。

摘　　要：介绍了多级A/O+生物脱氮技术在高浓度制药废水处理工程中的应用。实际工程运行结果表明,处理出水pH值为6~9、COD≤500 mg/L、SS≤400 mg/L、氨氮≤35 mg/L、TN≤70 mg/L、TP≤8 mg/L,符合《污水综合排放标准》(GB 8978-1996)的三级标准,其中总氮、总磷达到《污水排入城镇下水道水质标准》(CJ 343-2010)的B级标准,氨氮达到《工业企业废水氮、磷污染物间接排放限值》(DB 33/887-2013)要求。该工程采用的点对点水解布水、生物脱氮、磁悬浮风机等新型技术和设备,具有较好的推广应用价值。The application of multi-stage A/O and biological nitrogen removal technology in high concentration pharmaceutical wastewater treatment project was introduced.The practical operation results showed that the effluent pH was 6-9,and the effluent COD,SS,ammonia nitrogen,TN,TP concentrations were no more than 500 mg/L,400 mg/L,35 mg/L,70 mg/L,8 mg/L,respectively,which met the third-level standards of Integrated Wastewater Discharge Standard(GB 8978-1996).Among them,TN and TP met level B criteria in Wastewater Quality Standards for Discharge to Municipal Sewers(CJ 343-2010)and ammonia nitrogen met the requirements of Indirect Discharge for Emission Limitation of Nitrogen and Phosphorus for Industrial Wastewater(DB 33/887-2013).The new technologies and equipment applied in this process,such as point-to-point hydrolysis water distribution,biological nitrogen removal and magnetic suspension fan,have great application value.

关 键 词：制药废水 点对点布水 生物脱氮 多级A/O工艺 

分 类 号：TU992[建筑科学—市政工程]