固液分离/涡凹气浮/水解酸化/接触氧化处理屠宰废水  

Treatment of Slaughterhouse Wastewater by Solid-liquid Separation/Cavitation Air Flotation/Hydrolysis Acidification/Contact Oxidation

作　　者：白王军[1,2] 倪军 BAI Wang-jun;NI Jun(Hohai University,Nanjing 210098,China;Hohai University Design Institute Co.Ltd.,Nanjing 210098,China)

机构地区：[1]河海大学,江苏南京210098 [2]河海大学设计研究院有限公司,江苏南京210098

出　　处：《中国给水排水》2020年第4期106-109,共4页China Water & Wastewater

摘　　要：采用固液分离/涡凹气浮/水解酸化/接触氧化的组合工艺处理屠宰废水,在生物接触氧化池内采用间歇运行方式,很好地解决了间歇进水和生物接触氧化池连续运行的问题,最终出水COD平均为95 mg/L,BOD5平均为29 mg/L,SS平均为47 mg/L,动植物油平均为7 mg/L,NH3-N平均为12 mg/L,TP平均为2.4 mg/L,出水水质远远优于当地环评、环保部门要求和《污水综合排放标准》(GB 8978-1996)的一级标准。A combined process of solid-liquid separation/cavitation air flotation/hydrolytic acidification/contact oxidation was adopted to treat slaughterhouse wastewater.The batch operation mode was applied in biological contact oxidation tank,which solved the problem of intermittent influent and continuous operation in biological contact oxidation tank.The average effluent COD,BOD5,SS,animal and vegetable oil,NH3-N,TP were 95 mg/L,29 mg/L,47 mg/L,7 mg/L,12 mg/L,and 2.4 mg/L respectively,which were far superior to the requirements of local environmental protection department and the first level criteria in Integrated Wastewater Discharge Standard(GB 8978-1996).

关 键 词：屠宰废水 涡凹气浮 生物接触氧化 

分 类 号：TU992[建筑科学—市政工程]