检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:薛建强[1,2] 成友友[3,4] 王尔珍 隋蕾 曹建军[3,4] 黄宝杰[3,4] 薛涛 吕杰堂 XUE Jian-qiang;CHENG You-you;WANG Er-zhen;SUI Lei;CAO Jian-jun;HUANG Bao-jie;XUE Tao;L Jie-tang(National Engineering Laboratory of Exporting&Developing Low-permeability Oil and Gas Field,Xi’an 710018,China;Oil&Gas Technology Research Institute Chanqing Oil Field Company,Xi’an 710018,China;College of Petroleum Engineering,Xi’an Shiyou University,Xi’an 710065,China;Engineering Research Center of Development and Management for Low to Extra-Low Permeability Oil&Gas Reservoirs in West China,Ministry of Education,Xi’an 710065,China;No.2 Geo-exploration Institute,Henan Provincial Bureau of Geo-exploration and Mineral Development,Zhengzhou 450000,China;China Institute of Geological Environment Monitoring,Beijing 100081,China)
机构地区:[1]低渗透油气田勘探开发国家工程实验室,西安710018 [2]长庆油田分公司油气工艺研究院,西安710018 [3]西安石油大学石油工程学院,西安710065 [4]西部低渗-特低渗油藏开发与治理教育部工程研究中心,西安710065 [5]河南省地质矿产勘查开发局第二地质勘查院沉积矿产分院,郑州450000 [6]中国环境地质监测院,北京100081
出 处:《科学技术与工程》2020年第5期1859-1865,共7页Science Technology and Engineering
基 金:中国石油集团重大专项(2016E-0510)。
摘 要:注水开发作为超低渗油藏主要开发方式,而注水井欠注对油藏开发影响显著。姬塬地区长8油层组为典型超低渗油藏,针对其注水井欠注问题,在分析油藏注水井欠注现状的基础上,通过建立超低渗油藏有效驱动渗透率以及地层结垢量计算模型,系统地总结姬塬地区长8超低渗油藏的储层物性、地层结垢和注入水水质等因素对注水井欠注的影响,并提出对应的解决方案。研究结果表明:地层渗透率小于0.3×10^-3μm^2时注水井开始欠注,且表现为长期欠注、欠注程度高的特征;当地层结垢量大于2000 mg/L或注入水中悬浮物及含油量大于70 mg/L时,引起注水井欠注且表现为后期欠注特征。针对不同影响因素下欠注井的特征,提出5种增注工艺体系,在姬塬地区长8超低渗油藏实施后有效率高达88.2%,可有效治理该地区的注水井欠注问题,同时为同类型油藏的注水井欠注提供理论支持和治理依据。Water injection has long been a principal development method for the ultra-low permeability reservoirs.Therefore,the under-injection issue involved in water injection well can exert a significant influence on the reservoir development.According to the under-injection problems existing in Chang 8 reservoir from Jiyuan area,a typical ultra-low permeability reservoir,the status quo of under-injection was first studied.Through the establishment of effective drive permeability and formation scaling calculation model of ultra-low permeability reservoir,the influence of reservoir physical properties,formation scaling and injection water quality on the under-injection were systematically analyzed.Further,the corresponding solutions were put forward.Results show that:the under-injection probably occurs in the formation with the permeability less than 0.3×10^-3μm^2,and it can be characterized as long under-injection duration and high under-injection degree.Meanwhile,when the formation scaling is greater than 2000 mg/L or the suspended solids and oil content in injection water is larger than 70 mg/L,the under-injection usually appears in the later period.According to the characteristics of under-injection wells caused by different factors,five injection stimulation process systems were proposed.When dealing with the under-injection problems in the Chang 8 ultra-low permeability reservoirs from Jiyuan area,the effective rate of these systems reaches 88.2%,which proves that it is a certify solution for the under-injection problem and can provide a theoretical and practical method for other similar reservoirs.
关 键 词:姬塬地区超低渗油藏 长8油层组 注水井欠注 有效驱动渗透率 地层结垢
分 类 号:TE357[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.59.228.99