检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘静 赵若旭 陈宗学 李海旺[3] 郄禄文[1] Liu Jing;Zhao Ruoxu;Chen Zongxue;Li Haiwang;Qie Luwen(College of Civil Engineering and Architecture,Hebei University,Baoding 071002,China;Hebei Construction Group Corporation Limited,Baoding 071052,China;College of Civil Engineering,Taiyuan University of Technology,Taiyuan 030024,China)
机构地区:[1]河北大学建筑工程学院,保定071002 [2]河北建设集团股份有限公司,保定071052 [3]太原理工大学土木工程学院,太原030024
出 处:《建筑结构》2020年第5期82-87,共6页Building Structure
基 金:河北省自然科学基金(E2017201158);河北省高等学校科学技术研究项目(QN2016171);2016年“一省一校”专项经费;河北大学研究生创新资助项目(hbu2019ss017)。
摘 要:以河北北方学院体育馆弦支穹顶屋盖为研究对象,考虑几何和材料非线性、活载布置方式及初始几何缺陷分布模式和大小等因素,对结构进行特征值屈曲和非线性屈曲的荷载-位移平衡路径全过程分析。研究表明:半跨活载布置对稳定承载力无不利影响,恒载及活载全跨布置、初始几何缺陷按第2阶屈曲模态分布时,结构稳定承载力最小。活载布置方式影响结构屈曲位移形态,活载全跨布置时局部凹陷区域为沿短轴跨度方向呈不对称形式分布,活载半跨布置时局部凹陷均位于活载最不利布置一侧呈带状分布。弦支穹顶结构对初始几何缺陷的变化比较敏感,结构由无缺陷到缺陷增加至跨度的1/100过程中,荷载-位移曲线平衡路径出现两种不同的模式。The suspend-dome structure roof of Hebei North University gymnasium was taken as the research object,considering geometric and material nonlinearity,live load arrangement and initial geometric defect distribution mode and size,and the full process analysis was conducted on the load displacement equilibrium path for eigenvalue buckling and nonlinear buckling of the structure.The results show that the arrangement of half-span live load has no adverse effect on the bearing capacity of stability.When the arrangement of dead load and full span live load and the initial geometric imperfection are distributed according to the second order buckling mode,the stability of bearing capacity of the structure is the smallest.The layout of live load affects the form of structural buckling displacement.When the whole span of live load is arranged,the local depressions are distributed asymmetrically along the direction of the short axis span.When the half-span of live load is arranged,the local depressions are all located on the side of the most unfavorable layout of live load and distributed in a strip.The suspend-dome structure is more sensitive to the change of the initial geometric defect.During the process of the structure changing from defect-free to defect increasing to 1/100 of the span,two different modes of the load-displacement curve equilibrium path appear.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249