电缆隧道顶管机洞内扩径改造施工技术  

Construction Technology of Expanding Diameter inside Pipe Jacking Machine of Cable Tunnel

作　　者：吴发展[1] WU Fa-zhan(China Railway Tunnel Group No.2 Department Co.,Ltd.,Sanhe 065201,China)

机构地区：[1]中铁隧道集团二处有限公司,河北三河065201

出　　处：《中国市政工程》2020年第2期64-65,69,131,共4页China Municipal Engineering

摘　　要：基于深圳电网北环高压架空线改造入地电缆隧道工程,针对工期压力及安全风险,将敞开式顶管改为扩径改造后的泥水平衡顶管,从主驱动和刀盘扩径方面分析改造可行性。考虑已成型隧道内径,将顶管大部件拆解成小部件,通过吊机用隧道平板车运至扩挖改造区,在隧洞内完成组装后运转调试验收。创建顶管法隧道由敞开式转换为泥水平衡式接续顶进技术,充分利用原有设备,降低工程成本,满足现场施工需求,为同类工程提供参考。Based on the project of transforming the high voltage overhead line into the ground cable tunnel in the North Ring of Shenzhen Power Grid,aiming at the pressure of construction period&safety risk,the opentyped pipe jacking is changed into the slurrybalanced pipe jacking after the expansion,and the feasibility of the transformation is analyzed from the aspects of main drive&cutter head expansion.Considering the inner diameter of the formed tunnel,the large parts of the pipe jacking are disassembled into small parts,which are transported to the expansion&reconstruction area by the crane with the tunnel flat car,and the operation&commissioning acceptance are completed after the assembly in the tunnel.To create a pipe jacking method tunnel from the open-typed to the slurry-balanced continuous jacking technology,it has made full use of the original equipment,reduced the project cost,and met the needs of on-site construction;which may provide references for similar projects.

关 键 词：电缆隧道 顶管 扩径改造 起重吊装 泥水平衡顶管机 

分 类 号：U455.47[建筑科学—桥梁与隧道工程]