基于软磁复合材料的轴向磁通永磁电机设计与分析  

Design and Analysis of Axial Flux Permanent Magnet Motor Based on Soft Magnetic Composites

作　　者：王晓光[1] 周晟 刘凌云[1] 孙蕾 张强 WANG Xiaoguang;ZHOU Sheng;LIU Lingyun;SUN Lei;ZHANG Qiang(College of Electrical and Electronic Engineering,Hubei University of Technology,Wuhan 430068,China;Shandong Jingchuang Functional Composite Material Limited Company,Linyi Shandong 276017,China;Shandong Soft Magnetic Composites and Application Innovation Center, Linyi Shandong 276017,China)

机构地区：[1]湖北工业大学电气与电子工程学院,武汉430068 [2]山东精创功能复合材料有限公司,山东临沂276017 [3]山东省软磁复合材料及应用创新中心,山东临沂276017

出　　处：《微电机》2020年第3期20-25,共6页Micromotors

基　　金：湖北省自然科学基金(2019CFB759);湖北工业大学绿色工业引领计划(ZZTS2017003);国家自然科学基金(51607060)。

摘　　要：软磁复合材料(SMC)具有低涡流损耗、各向同性、材料易加工等优点,同时也有高磁滞损耗、低磁导率、低机械强度等缺点。采用SMC材料设计了一款轴向磁通永磁同步电机,为弥补SMC材料磁导率低导致电机转矩密度低的缺点,提出了一种齿部扩张的定子结构提高电机的转矩密度;采用有限元方法对本文提出的结构进行了仿真计算,并与传统的硅钢片电机进行性能的综合比较。研究结果表明,SMC轴向磁通电机具较好的性能和较高的转矩密度。Soft magnetic composite(SMC)has the advantages of low eddy current loss,isotropy and easy processing.It also has the disadvantages of high hysteresis loss,low permeability and low mechanical strength.An axial flux permanent magnet synchronous motor(PMSM)was designed using SMC material.To compensate for the low torque density caused by the low permeability of SMC material,a stator structure with expanded teeth was proposed to improve the torque density of the motor.The structure proposed in this paper was simulated by finite element method and compared with the traditional silicon steel sheet.The performance of the motor was compared comprehensively.The results show that the SMC axial flux motor has better performance and higher torque density.

关 键 词：软磁复合材料(SMC) 轴向磁通电机 铁耗 定子齿部扩张结构 

分 类 号：TM351[电气工程—电机]