利用丙烷燃烧火焰喷吹铬矿粉实验研究  

Experimental Research on Injection of Chromium Ore Powder with Propane Combustion Flame

作　　者：董大西[1] 韩宝臣 赵亮 姜楠[2,3] 胡云生 朱荣[2,3] DONG Daxi;HAN Baochen;ZHAO Liang;JIANG Nan;HU Yunsheng;ZHU Rong(Hegang Group Shijiazhuang Iron and Steel Co.Ltd.,Shijiazhuang 050031,China;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;High-grade Metal Material Smelting and Manufacture,Beijing City Major Laboratory,Beijing 100083,China)

机构地区：[1]河钢集团石家庄钢铁有限责任公司,河北石家庄050031 [2]北京科技大学冶金与生态工程学院,北京100083 [3]高端金属材料特种熔炼与制备北京市重点实验室,北京100083

出　　处：《工业加热》2020年第3期10-12,共3页Industrial Heating

摘　　要：以廉价的铬矿石为原料代替铬铁合金进行熔融还原冶炼不锈钢冶炼越来越受到关注,该工艺可明显降低生产成本。之前的研究中已经对丙烷燃烧喷粉过程的喷枪结构进行了相关的数模研究。对丙烷燃烧喷粉过程火焰及气流进行实验探索,搭建了丙烷燃烧火焰喷粉实验平台,利用丙烷燃烧加热铬矿粉研究各因素对喷射火焰气流的影响。实验结果表明:在相同丙烷流量下,火焰长度与氧流量成反比,氧流量越大,火焰长度越短;在相同的氧流量和丙烷流量下,加粉比不加粉时火焰长度要长,喷粉时燃烧丙烷更有利于加热熔池表面。The use of cheap chromium ore as a raw meterial instead of forrochrome for smelting reduction smelting of stainless stell has attracted more and more attention,which can significantly reduce production cost.Relevant numerical simulation studies on the gun structure of propane combustion powder injection process had been carried out in previous studies.In this paper,the process of propane combution and gas flow were studied and on experimant platform of propare combution and flame powder injection was estoblished.The influence of various factors on je flame gas flow was studied by heating chorme are powerd with propare combution.The experimental results showed that the flame length is inversely proportional to the oxygen flow rate on the conditon of the same propane flow rate,the larger the oxygen flow rate,the shorter the flame length;on the same oxygen flow rate and propane flow rate,the flame length is longer when the powder is added when the powder is not added,and propane combustion is more conducive to heating the surface of the molten pool.

关 键 词：丙烷燃烧 火焰长度 铬矿粉喷吹 熔融还原 

分 类 号：TF746[冶金工程—钢铁冶金]