检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘伟 田宏星 陈玉春[2] 潘尚能 黄兴 LIU Wei;TIAN Hong-xing;CHEN Yu-chun;PAN Shang-neng;HUANG Xing(AECC Hunan Aviation Powerplant Research Institute,Zhuzhou 412002,China;School of Power and Energy,Northwestern Polytechnical University,Xi’an 710072,China)
机构地区:[1]中国航发湖南动力机械研究所,湖南株洲412002 [2]西北工业大学动力与能源学院,陕西西安710072
出 处:《推进技术》2020年第2期277-284,共8页Journal of Propulsion Technology
摘 要:为了探索航空发动机空气起动系统的匹配机理,寻找改善全包线内系统性能的技术途径,通过对系统各单元工作特性及相互制约条件的分析,在综合辅助动力装置(APU)、引气管路、调压装置、空气涡轮起动机(ATS)特性计算模型的基础上,发展了一种基于各单元匹配的空气起动系统性能计算方法。该方法能够准确获取系统设计点、各单元特征参数及边界条件,确定APU引气特性、引气管路损失特性、ATS喉道面积和调压装置蝶阀调节规律,进而实现空气起动系统全包线特性计算。利用试验数据对模型进行了校验,结果表明,输出功率计算误差<3.5%、引气流量计算误差<4%。该模型克服了目前工程上只能单点计算,且需反复迭代的缺陷,为空气起动系统总体性能设计和评估提供了一种有效的分析工具。To explore the matching mechanism and improve the performance in full envelope of aeroengine air starting systems,a simplified method to simulate air starting systems performance in terms of matching was developed through the analysis of the characteristics and mutual restriction of each unit.The method was of comprehensive auxiliary power unit,air pipeline,pressure regulator and air turbine starter performance simulation model.It is capable of obtaining design point of air starting systems and key characteristic parameters of each unit and boundary condition accurately.The air bleeding characteristics of auxiliary power unit,losing characteristics of air bleeding pipeline,throat area of air turbine starter and regulation law of pressure regulation device were determined,consequently the characteristics of air starting systems were computed at various states in engine starting envelope.This model was validated using testing data.Results show that,the deviations of power output is within3.5%,while the deviations of air bleeding flow is within 4%,meeting the requirements of engineering application.The model can overcome the disadvantages of single-point computation and repeated iteration of engineering method.The model provides an effective analysis tool for performance design and evaluation of air starting systems.
关 键 词:空气起动系统 匹配机理 引气管路损失 调压装置特性 计算方法
分 类 号:V235.13[航空宇航科学与技术—航空宇航推进理论与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.141.244.88