基于NSGA-Ⅱ算法的同轴送粉激光熔覆工艺多目标优化  

Multi-Objective Optimization of Coaxial Powder Feeding Laser Cladding Based on NSGA-Ⅱ

作　　者：赵凯 梁旭东 王炜 杨萍 郝云波 朱忠良 Zhao Kai;Liang Xudong;Wang Wei;Yang Ping;Hao Yunbo;Zhu Zhongliang(Shanghai Aerospace Equipments Manufacturer Co.,Ltd.,Shanghai 200245,China)

机构地区：[1]上海航天设备制造总厂有限公司,上海200245

出　　处：《中国激光》2020年第1期88-97,共10页Chinese Journal of Lasers

基　　金：国家自然科学基金青年基金(51705328);上海市青年科技英才扬帆资助项目(17YF1408500)。

摘　　要：同轴送粉激光熔覆工艺的稳定性受诸多因素的影响,其工艺参数难以寻优。通过设计以工艺参数(激光功率、送粉速度、扫描速度)为输入、以反映熔覆层形貌和质量的特征参数为响应的中心复合实验,对比分析了响应曲面法的回归模型与神经网络对单道熔覆结果的预测效果。采用多目标优化算法NSGA-Ⅱ对三个工艺参数进行优化求解。结果表明:采用优化后的参数进行激光熔覆的修复件表面硬度增大了17.11%,基体热影响区深度减小了13.90%,熔覆效率增大了6.10%。The stability of coaxial powder feeding laser cladding process is affected by many factors,which makes it difficult to estimate the optimal process parameters.This study designs a central composite experiment,which considers the process parameters(laser power,powder feeding speed,and scanning speed)as input and outputs the characteristic parameters that reflect the cladding morphology and quality.The regression model and neural network in the response surface method are applied to the prediction of the single-pass cladding results,and their effects are compared.Based on this,a multi-objective optimization algorithm,i.e.,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),is used to optimize the three aforementioned process parameters.The results denote that the optimized process parameters can improve the surface hardness of the repaired parts by 17.11%,reduce the depth of the base heat-affected zone by 13.90%,and improve the cladding efficiency by 6.10%.

关 键 词：激光技术 激光熔覆 工艺参数 神经网络 遗传算法 工艺优化 

分 类 号：TG665[金属学及工艺—金属切削加工及机床]