检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:覃虹菱 王玫[1,2] 宋浠瑜 周陬[1] 罗丽燕 QIN Hongling;WANG Mei;SONG Xiyu;ZHOU Zou;LUO Liyan(Provincial Ministry of Education Key Laboratory of Cognitive Radio and Signal Processing,Guilin University of Electronic Technology,Guilin 541004,Guangxi,China;School of Information Science and Engineering,Guilin University of Technology,Guilin 541004,Guangxi,China)
机构地区:[1]桂林电子科技大学认知无线电与信息处理省部共建教育部重点实验室,广西桂林541004 [2]桂林理工大学信息科学与工程学院,广西桂林541004
出 处:《声学技术》2020年第2期243-250,共8页Technical Acoustics
基 金:国家自然科学基金(61771151);广西重点研发计划项目(AB17292058);广西自然科学基金(2016GXNSFBA38014);中国博士后科学基金(2016M602921XB);广西高校无人机遥测重点实验室开放基金(WRJ2016KF01)资助项目。
摘 要:由于室内环境下噪声及混响干扰造成声学脉冲响应(Acoustic Impulse Response,AIR)的波达时间(Time of Arrival,TOA)模糊,导致现有室内空间几何建图技术存在计算复杂等缺点,提出一种基于AIR可信度判断与霍夫变换结合的定位和建图一步完成的方法。该方法基于到达时间差(Time Difference of Arrival,TDOA)迭代估计声源位置并计算准确的TOA,随后基于声收发设备与一阶反射TOA关于反射面的椭圆约束关系,结合可信度判断与霍夫变换,筛选可信低阶TOA以实现室内反射面的二维位置估计。蒙特卡洛仿真结果表明,在混响时间T60为0.1347 s、AIR误差标准差为22.7×10^-3 ms、大小为10 m×8 m×4 m复杂室内环境下,墙面定位平均距离误差为10.1 cm,平均角度误差为2.7958°。在大小为5.26 m×3.5 m×3.35 m的真实房间中,该方法可以实现声源与墙体位置的同时定位,完成规则盒型房间的二维地图重构,且墙面定位平均距离误差为2.6 cm,平均角度误差为2.17°。The existing indoor mapping technology has the shortcomings in high cost and high computational complexity,which is caused by the TOA(time of arrival)ambiguity of the acoustic impulse response(AIR)due to noise and reverberation in the indoor environment.To solve this problem,an indoor localization and mapping method based on combining AIR credibility judgment and Hough transform is proposed in this paper.Firstly,the method iteratively estimates the position of the sound source based on the Time Difference of Arrival(TDOA)and calculates the accurate TOA.Then,by using the elliptical constraint relationship between the acoustic transceiver and the first-order reflection TOA on the reflective surface and combining the credibility judgment and Hough Transform,the reliable low-order TOA is selected to achieve the two-dimensional position estimation of the indoor reflective surface.Monte Carlo simulation results show that in the complex indoor environment of 10m×8m×4m with reverberation time T60 of 0.1347 s and AIR error standard deviation of 22.7×10^-3 ms,the average distance error of wall localization is 10.1cm,and the average angular error is 2.7958°.In the following experiments in a real room of 5.26 m×3.5 m×3.35 m,this method can realize the simultaneous localization of sound source and wall position,and complete the two-dimensional reconstruction of a box-type room.And the average distance error of wall localization is 2.6 cm,and the average angular error is 2.17°.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30