基于PTV的钛合金离心铸造物理模拟流速表征  

Physical Simulation Flow Velocity Characterization of Titanium Alloy Centrifugal Casting Based on PTV

作　　者：肖艮 沈旭[1] 殷亚军[1] 李振涛 计效园[1] 周建新[1] Xiao Gen;Shen Xu;Yin Yajun;Li Zhentao;Ji Xiaoyuan;Zhou Jianxin(State Key Laboratory of Material Processing and Die&Mould Technology,Huazhong University of Science and Technology)

机构地区：[1]华中科技大学材料成形与模具技术国家重点实验室

出　　处：《特种铸造及有色合金》2020年第4期404-408,共5页Special Casting & Nonferrous Alloys

基　　金：国家自然科学基金资助项目(51605174)。

摘　　要：针对钛合金立式离心铸造过程,结合粒子追踪测速技术(PTV),对相似钛合金流体充型速度进行定量表征。首先,基于物理模拟相似性原理,设计了试验模具,配置了常温相似流体;其次,进行了不同转速和浇注速度参数的物理模拟试验,并采用PTV方法获得粒子随流体运动的瞬态速度;最后分析了流体运动特征:示踪粒子会沿着与旋转速度相对的型腔壁面运动;低转速条件下适当提高离心转速和减小浇注速度有利于流体平稳充型。For the titanium alloy vertical centrifugal casting process,combined with particle tracking velocimetry(PTV),the filling speed of similar fluids to titanium alloys was quantitatively characterized.Firstly,based on the principle of physical simulation similarity,an experimental mold was designed and a similar fluid at room temperature was configured.Secondly,physical simulation experiments with different mold rotation speed and pouring speed were carried out,and the PTV method was used to obtain the transient speed of particles moving with the fluid.Finally,the characteristics of fluid motion was analyzed that the tracer particles would move along the cavity wall surface opposite to the rotation speed,and through properly increasing the centrifugal speed and reducing the pouring speed under low speed conditions,their were conducive to the smooth filling of the fluid.

关 键 词：钛合金 离心铸造 物理模拟 粒子追踪测速(PTV) 

分 类 号：TP311[自动化与计算机技术—计算机软件与理论] TG249.4[自动化与计算机技术—计算机科学与技术]