检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:罗桂发[1] 张玉青 侯国求 陆展 LUO Guifa;ZHANG Yuqing;HOU Guoqiu;LU Zhan(Central-South Architectural Design Institute Co.,Ltd.,Wuhan 430071,China)
机构地区:[1]中南建筑设计院股份有限公司,武汉430071
出 处:《建筑结构》2020年第8期95-99,126,共6页Building Structure
摘 要:武汉归元寺商业综合体项目利用市政道路下的地下空间,把被市政道路分割的4个独立地下室整合成一个大的整体地下室,地下室顶板作为市政道路的支承结构,顶板汽车荷载取值是本项目的重点。对作用在地下室顶板上的公路-Ⅰ级和公路-Ⅱ级车辆荷载进行了等效荷载分析,考虑了2.5~9.0m范围共8种不同板跨和0~4.0m范围共8种不同覆土厚度的影响,并给出了相应的等效荷载以及考虑覆土厚度影响的折减系数。介绍了武汉市消防车基本情况,发现芬兰博浪涛101m登高平台车的重量大于公路-Ⅰ级车辆荷载的数值,因此对可能作用在地下室顶板上的芬兰博浪涛101m登高平台车也进行了等效荷载分析。与《建筑结构荷载规范》(GB 50009-2012)比较得出,当覆土厚度≥2.4m时,计算得到的部分考虑覆土厚度影响的折减系数比荷载规范值大,这可能是分析采用多排多列车辆布置的原因,应谨慎对待工程设计取值。The commercial complex project near Wuhan Guiyuan Temple uses the underground space under the municipal roads to integrate the 4 independent basements divided by the municipal roads into a large overall basement. The basement roof is used as the supporting structure of the municipal roads. The value of the vehicle load on basement roof is the key of the project. Equivalent load analysis of highway-level Ⅰ and highway-level Ⅱ vehicle loads acting on the basement roof was considered, taking into account impacts of a total of 8 different plate spans ranging from 2.5 m to 9.0 m and a total of 8 different cover thicknesses ranging from 0 to 4.0 m. The corresponding equivalent load and the reduction factor considering the influence of the thickness of the cover were given. The basic situation of Wuhan fire trucks was introduced to find that the weight of Finland Bronto 101 m skylift vehicle was greater than the value of highway-level Ⅰ vehicle load. Therefore, the equivalent load analysis was conducted of Finland Bronto 101 m skylift vehicle which might act on the basement roof. Compared with the Load code for the design of building structures(GB 50009-2012), when the thickness of the cover was no less than 2.4 m, some of the calculated reduction factor considering the influence of the thickness of the cover was greater than the load specification value, which might be attributed to multiple rows of the vehicles arrangement. Therefore, engineering design values should be treated with caution.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229