检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵兰萍[1] 郑振鹏 郭本涛 杨志刚[2] ZHAO Lanping;ZHENG Zhenpeng;GUO Bentao;YANG Zhigang(School of Mechanical Engineering,Tongji University,Shanghai 201804,China;Shanghai Key Laboratory of Vehicle Aerodynamics and Vehicle Thermal Management Systems,Tongji University,Shanghai 201804,China)
机构地区:[1]同济大学机械与能源工程学院,上海201804 [2]同济大学上海市地面交通工具空气动力与热环境模拟重点实验室,上海201804
出 处:《同济大学学报(自然科学版)》2020年第4期559-565,共7页Journal of Tongji University:Natural Science
基 金:上海市地面交通工具空气动力与热环境模拟重点实验室(18DZ227330)。
摘 要:基于VOF(volume of fluid)两相流模型,采用计算流体力学(CFD)方法对某款锂离子电池用多孔平板热管的性能进行了仿真研究。分析表明:方孔结构比圆孔结构具有更大的蒸发/冷凝传质率和管内平均流速,6方孔平板热管的当量导热系数比原始6圆孔结构提升了30.5%;热管当量导热系数随内部孔数的增加而增加,但性能提升幅度渐渐变小;在蒸发段参数不变的前提下,热管的性能是由冷凝效果及冷凝段回流效率共同决定,热管冷凝段长度的增大并没有实质性改变热管的冷热端温差,此时所定义的当量导热系数并不能反应热管的实际性能。Using the CFD simulation method based on the volume of fluid(VOF)two-phase flow model,the characteristics of a multi-channel flat heat pipe developed for a lithium-ion battery was studied.Compared with the circular channel structure,the rectangular channel structure has a higher mass transfer rate of condensation/evaporation and a higher average velocity in the channels.The equivalent thermal conductivity of 6 square-channel flat heat pipe is 30.5%larger than that of the original structure with 6 circular channels.The heat pipe performance increases with the increase of channel number,but the increasing rate slows down gradually.With the fixed geometric parameters and the power input of the evaporation section,the performance of the multichannel flat heat pipe is determined by the combined effect of condensation in the condensation section and the return efficiency of condensate liquid flow.As a result,the increase of the length of the condensation section does not substantially change the temperature difference between the two ends of the heat pipe,and the equivalent thermal conductivity does not reflect the effect of the length of condensation section on the performance of the heat pipe.
关 键 词:多孔平板热管 当量导热系数 冷热端温差 VOF模型 结构因素
分 类 号:TK172.4[动力工程及工程热物理—热能工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171