锥台形观察窗的耐压壳强度及稳定性研究  

Study on the Strength and Stability of Pressure Shell with Frustum-shaped Viewport

作　　者：梁婉婉 朱永梅[1] 周祥 张建[1] 赵希禄 LIANG Wanwan;ZHU Yongmei;ZHOU Xiang;ZHANG Jian;ZHAO Xilu(School of Mechanical Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003;School of Mechanical Engineering,Saitama University of Technology,Saitama 396-0293)

机构地区：[1]江苏科技大学机械工程学院,镇江212003 [2]琦玉工业大学机械学院,琦玉396-0293

出　　处：《舰船电子工程》2020年第3期169-174,共6页Ship Electronic Engineering

基　　金：国家自然科学基金项目(编号:51709132);江苏省自然科学基金项目(编号:20150469)资助。

摘　　要：载人潜水器是进行科学考察的重要工具,观察窗作为耐压壳的一部分,是保障载人潜水器作业功能的前提。论文基于7000m水深条件下,采用接触有限元的方法研究观察窗与耐压壳的应力与变形情况,并对锥台形观察窗耐压球壳进行强度分析和稳定性分析。其次制作比例树脂模型,对模型进行试验分析以及数值分析得出考虑实际缺陷的数值解与试验结果一致,破坏位置与缺陷位置一致,验证数值分析的合理性,为后续深海潜水器观察窗结构研究提供参考依据。Deep-sea manned submersible is an important tool for scientific investigation.The viewport,as a part of the pressure shell,is the premise to ensure the operation function of manned submersible.In this paper,based on the water depth of7000 m,the contact finite element method is used to study the stress and deformation of the viewport and the pressure shell,and the strength and stability of the pressure shell with the frustum-shaped viewport are analyzed.Secondly,the proportional resin model is made,and the experimental model is analyzed by experiment and numerical analysis.It is concluded that the numerical solution considering the actual defects is consistent with the experimental results,and the failure location is consistent with the defect location.The rationality of the numerical analysis is verified,which provides a reference for the follow-up study of the structure of the viewport of deep-sea submersible.

关 键 词：耐压壳 观察窗 强度 稳定性 

分 类 号：U661.4[交通运输工程—船舶及航道工程]