基于射流掩膜电解加工不锈钢注塑微结构研究  

Study of Injection Molding Microstructure of Stainless Steel Based on Jet Mask Electrochemical Machining

作　　者：庄怀印 郭钟宁[1] 王俊杰 吴明[1] Zhuang Huai-yin;Guo Zhong-ning;Wang Jun-jie;Wu Ming(School of Mechanical and Electrical Engineering,Guangdong University of Technology,Guangzhou 510006,China)

机构地区：[1]广东工业大学机电工程学院,广东广州510006

出　　处：《广东工业大学学报》2020年第3期70-74,共5页Journal of Guangdong University of Technology

基　　金：国家自然科学基金资助项目(51575113)。

摘　　要：固体表面的润湿性受到表面粗造度和表面微结构的影响。在分析总结几种常用表面微结构加工技术的基础上,提出使用射流掩膜电解加工方法,在不锈钢表面加工微坑阵列结构,研究加工电压对微坑尺寸影响规律和微结构对润湿性的影响。将不锈钢微坑结构作为模具,用聚二甲基硅氧烷(polydimethylsiloxane,PDMS)注塑出微凸结构,用氟硅烷修饰后测量其静态接触角为(151.7±0.51)°。The wettability of the solid surface is affected by surface roughness and surface microstructure.On the basis of analyzing and summarizing several common surface microstructure processing techniques,the jet mask electrolytic processing method is proposed to process the micro-pit array structure on the surface of stainless steel,and study the influence of processing voltage on the size of the micro-pit and influences of the wettability on the microstructure.The stainless steel micro-pit structure is used as a mold,and the micro-convex structure is injection molded by PDMS(polydimethylsiloxane).The static contact angle is measured by fluorosilane and the contact angle is(151.7±0.51)°.

关 键 词：润湿性 掩膜电解加工 微结构 接触角 

分 类 号：TG662[金属学及工艺—金属切削加工及机床]