检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郑作伟[1] 郑玉平 潘书燕 刘龙浩 揭萍[1] 郝后堂[1] ZHENG Zuowei;ZHENG Yuping;PAN Shuyan;LIU Longhao;JIE Ping;HAO Houtang(Shenzhen Branch of NARI Technology Co.,Ltd.,Shenzhen 518054,China;NARI Group Corporation(State Grid Electric Power Research Institute),Nanjing 211106,China;State Key Laboratory of Smart Grid Protection and Control,Nanjing 211106,China;State Key Laboratory for Power Grid Safety and Energy Conservation(China Electric Power Research Institute),Beijing 100192,China)
机构地区:[1]国电南瑞科技股份有限公司深圳分公司,广东省深圳市518054 [2]南瑞集团有限公司(国网电力科学研究院有限公司),江苏省南京市211106 [3]智能电网保护和运行控制国家重点实验室,江苏省南京市211106 [4]电网安全与节能国家重点实验室(中国电力科学研究院有限公司),北京市100192
出 处:《电力系统自动化》2020年第10期174-179,共6页Automation of Electric Power Systems
摘 要:新一代调相机在中国特高压直流换流站中逐步得到应用。正在运行的调相机失磁保护励磁电压判据采用励磁电压平均值作为保护动作量,难以可靠区分调相机深度进相运行和全失磁故障2种工况,也不能识别大部分脉冲丢失的部分失磁故障。文中提出了励磁电压方均根值判据,与平均值判据协同作用解决调相机深度进相运行和全失磁故障的区分问题;提出了脉波方均根值判据,解决丢失脉冲的部分失磁故障的识别问题。阐述了方均根值判据、平均值判据和脉波方均根值判据定值的整定方法。动模试验和现场试验结果验证了所提判据及定值整定方法的可行性和有效性。The new generation of condenser is gradually used in the ultra-high-voltage direct current(UHVDC)station.Because the excitation voltage criterion of loss of excitation protection of the condensers in operation uses the average value of excitation voltage as its protection action value,it is difficult to distinguish the deeply leading phase operation and complete loss of excitation of the condenser reliably,and cannot distinguish most of the partial loss of excitation with pulse missing.The root mean square(RMS)criterion of excitation voltage is proposed to solve the problem of distinguishing deeply leading phase operation and complete loss of excitation of the condenser with the coordination of the average value criterion.The pulse RMS criterion is proposed to solve the problem of distinguishing partial loss of excitation with pulse missing.The method to calculate the settings of the RMS criterion,average value criterion and pulse RMS criterion is expounded.Results of the dynamic simulation test and onsite test verify the feasibility and validity of the criterion and the method of setting calculating.
分 类 号:TM721.1[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.117.151.179