FX660旋流器组优化升级试验研究  

Experimental Study on Optimization and Upgrading of FX660 Cyclone Unit

作　　者：余厚福 李永峰 申滔 刘倩 YU Hou-fu;LI Yong-feng;SHEN Tao;LIU Qian(Jiangxi Copper Yinshan Mining Co.Ltd,Shangrao 334200,Jiangxi,China;Weihai Haiwang Cyclone Co.Ltd,Weihai 264200,Shandong,China)

机构地区：[1]江西铜业集团银山矿业有限责任公司,江西上饶334200 [2]威海市海王旋流器有限公司,山东威海264200

出　　处：《铜业工程》2020年第2期29-31,46,共4页Copper Engineering

摘　　要：银山矿业6500t/d铜硫选矿厂一段磨矿系统采用SABC流程,磨矿分级作业采用8台FX660旋流器(4开4备),该系统投产以来,随着生产的逐步稳定,磨矿系统台效由投产初期的270.8t/h提高到300t/h,旋流器溢流中-74μm级别含量达到65%以上,但+178μm级别含量达到9.36,略高于计划要求。为了降低旋流器溢流中+178μm级别的含量,对FX660旋流器进行优化升级,采用蜗壳预分级进料体新结构旋流器,同时对旋流器溢流管和沉砂嘴直径进行调整,将旋流器溢流中+178μm含量降低了3.02个百分点,-74μm级别提高了1.85个百分点,旋流器分级效率提高了1.77个百分点。分级作业返砂比降低了29.23个百分点。The first stage grinding system of 6500 t/D Copper-sulphur concentrator of Yinshan mining adopts SABC process,and eight FX660 hydrocyclones are used for grinding and classification,the bench efficiency of the grinding system was increased from 270.8 T/h to 300 t/h at the beginning of operation.The content of-74 Micron grade in the overflow of the cyclone reached over 65%,but the content of+178 Micron grade reached 9.36,which was slightly higher than the requirement of the plan.In order to reduce the+178 Micron level content in the overflow of the cyclone,the optimized upgrade of the cyclone FX60 was carried out by adopting a new structure cyclone with a spiral case pre-graded feed body and adjusting the diameter of the overflow pipe and the grit-sinking nozzle of the cyclone,the+178 Micron content in the overflow of hydrocyclone was reduced by 3.02 percentage points,the-74 Micron level was increased by 1.85 percentage points,and the classification efficiency of hydrocyclone was increased by 1.77 percentage points.The sand return ratio of the classification operation was reduced by 29.23 percentage points.

关 键 词：旋流器 蜗壳预分级进料体 溢流细度 溢流管 沉砂嘴 分级效率 

分 类 号：TD9[矿业工程—选矿]