基于薄壳理论的焊接金属波纹管失弹机理研究  

Mechanism Study on Elasticity Loss of Welded Metal Bellows Based on Thin Shell Theory

作　　者：马咏梅[1] 卢翔宇 马传鑫 项章特 吴昊[2] 张弦 MA Yong-mei;LU Xiang-yu;MA Chuan-xin;XIANG Zhang-te;WU Hao;ZHANG Xian(Manufacturing Science and Engineering of Sichuan University,Chengdu 610065,China;Sichuan Sunny Seal Co.Ltd.,Chengdu 610045,China;Science and Technology on Reactor System Design Technology Laboratory,Nuclear Power Institute of China,Chengdu 610213,China)

机构地区：[1]四川大学制造科学与工程学院,四川成都610065 [2]四川日机密封件股份有限公司,四川成都610045 [3]中国核动力研究设计院,核反应堆系统设计技术重点实验室,四川成都610213

出　　处：《石油化工设备》2020年第3期12-17,共6页Petro-Chemical Equipment

基　　金：四川省科技成果转化项目(专项)计划(2016CC0026)。

摘　　要：依据弹性薄壳理论中应变位移关系以及材料的应力松弛理论,导出了机械密封用焊接金属波纹管在实际工况下的失弹方程,得到了波纹管的失弹曲线。根据试验得到的材料应力松弛曲线,确定了材料在工况温度下的应力松弛参数值。在ANSYS Workbench中对波纹管失弹进行有限元分析,将有限元分析结果与理论计算结果对比。研究结果表明,理论计算公式能较好地描述波纹管长期在高温下工作的失弹现象,有限元分析验证了采用弹性薄壳理论建立失弹方程的正确性,可为波纹管的可靠性研究提供依据。Based on the strain-displacement relationship in the elastic thin shell theory,as well as the theory of material stress relaxation,the elasticity loss equation of welded metal bellows of mechanical seal was derived under actual conditions,the elasticity loss curve of bellows was obtained.According to the stress relaxation curve of the material obtained from the test,the stress relaxation parameters of the material under the condition of temperature were determined.In ANSYS Workbench,the finite element analysis was performed on the elasticity loss of bellows and the finite element analysis was compared with the theoretical calculation results.The results show that the theoretical calculation formula could well describe the elasticity loss of bellows to work at high temperature and the formula had high engineering application.The finite element analysis verifies the correctness of establishing the elasticity equation using the elastic thin shell theory,which can provide a basis for the reliability research of bellows.

关 键 词：焊接金属波纹管 机械密封 薄壳理论 失弹 应力松弛 

分 类 号：TG113[金属学及工艺—物理冶金] TH701[金属学及工艺—金属学]