冷金属过渡电弧增材制造H13钢块体的显微组织与力学性能  

Microstructure and Mechanical Properties of Cold Metal Transfer Wire-Arc Additive Manufactured H13Steel Block

作　　者：白涛 林健[1] 程四华[2] 雷永平[1] 符寒光[1] 葛进国 BAI Tao;LIN Jian;CHENG Sihua;LEI Yongping;FU Hanguang;GE Jinguo(College of Materials Science and Engineering,Beijing University of Technology,Beijing 100124,China;Shougang Research Institute of Technology,Beijing 100041,China)

机构地区：[1]北京工业大学材料科学与工程学院,北京100124 [2]首钢技术研究院,北京100041

出　　处：《机械工程材料》2020年第4期67-71,共5页Materials For Mechanical Engineering

基　　金：国家重点研发计划项目(2017YFB1104803);国家自然科学基金资助项目(51005004);北京市自然科学基金资助项目(3132006)。

摘　　要：采用机器人辅助冷金属过渡电弧增材制造技术制备五层十五道结构的H13钢块体,研究了沉积块体的表面质量、显微组织和力学性能。结果表明:H13钢块体表面无宏观裂纹;块体主体区组织为晶粒取向均匀的针状马氏体,搭接区组织由晶粒取向杂乱的针状马氏体和不规则铁素体组成;块体主体区的平均显微硬度为479HV,远高于退火态H13钢的(254HV),而搭接区因存在铁素体,其硬度明显降低,平均值仅为381HV;冷金属过渡电弧增材制造H13钢块体的整体拉伸性能优于退火态H13钢的。H13steel blocks with a 5-layer and 15-pass structure were prepared by robotic cold metal transfer wire-arc additive manufacturing technique.The surface quality,microstructure and mechanical properties of the deposited block were investigated.The results show that there was no macro-crack on the surface of H13steel block.The structure of the body-zone of the block was acicular martensite with uniform grain orientation,and the structure of the lap-zone was composed of acicular martensite with irregular grain orientation and irregular ferrite.The average micro-hardness of the body-zone of the block was 479HV,which was much higher than that of annealed H13steel(254HV),while the hardness of the lap-zone significantly decreased due to the presence of ferrite,with the average value of 381HV.The overall tensile properties of the cold metal transfer wire-arc additive manufactured H13steel block were better than those of annealed H13steel.

关 键 词：增材制造 冷金属过渡 显微组织 显微硬度 拉伸性能 

分 类 号：TG47[金属学及工艺—焊接]