基于单平行分束器的偏光干涉系统  

Polarization interference system based on single polarization parallel beam splitter

作　　者：马丽丽[1] 牛明生[1] 苏富芳[1] 史萌[1] 吴闻迪[1] 宋连科[1] MA Lili;NIU Mingsheng;SU Fufang;SHI Meng;WU Wendi;SONG Lianke(Shangdong Provincial Key Laboratory of Laser Polarization and Information Technology, Laser Institute, Qufu Normal University, Qufu 273165, China)

机构地区：[1]曲阜师范大学激光研究所山东省激光偏光与信息技术重点实验室,曲阜273165

出　　处：《激光技术》2020年第3期382-387,共6页Laser Technology

基　　金：国家自然科学基金资助项目(11104161);山东省自然科学基金面上资助项目(ZR2018MD015);山东省重点研发计划资助项目(2017GSF7125)。

摘　　要：为了克服常规偏光干涉系统中核心器件萨瓦板(Savart)偏光镜制作工艺复杂、装调难度高的缺点,解决由于Savart偏光镜装调、加工误差造成的偏光干涉系统条纹混叠和调制度下降的问题,采用了一种基于单平行分束器(SPBS)的偏光干涉系统的方法,分析了系统的结构原理,采用矩阵传递函数推导了经偏光干涉系统出射光的琼斯矩阵及相干叠加强度,得出了和基于Savart偏光镜的干涉系统类似的干涉结果,分析了系统光程差与入射角及入射面的变化关系,并通过实验验证了理论分析的正确性。结果表明,由于SPBS结构简单,不需要多个单元组合,所以不存在装调误差,并且大幅度降低了加工误差。In order to overcome the detects of Savart polarizer,which is the core device of polarizing interference system,such as complex fabrication process and high difficulty in assembling and adjusting,and to solve problems of interference fringe overlying and modulation decline caused by the assembling and processing errors of Savart polarizer,a method of a polarizing interference system based on a single parallel beam splitter(SPBS)was adopted.The structure and principle of this system were analyzed.Jones matrix and coherence intensity of the light exited from the polarizing interferometer system were derived by matrix transfer function.The interference effect is similar to that of the interferometer system based on Savart polarizer.The relationships between the optical path difference of the system and the incident angle and the incident surface were also analyzed.The correctness of the theoretical analysis was verified by experiments.The results show that because SPBS is simple in structure and not required Multiple unit combinations,there is no assembly error,and the processing error will be greatly reduced.

关 键 词：物理光学 偏光棱镜 偏光干涉 单平行偏振分束器 

分 类 号：O436.3[机械工程—光学工程]