检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙连坡 陈卓 霍宏博 张磊 王文 赵洪山 Sun Lianpo;Chen Zhuo;Huo Hongbo;Zhang Lei;Wang Wen;Zhao Hongshan(Bohai Petroleum Research Institute,Tianjin Branch of CNOOC(China)Co.,Ltd.,Tianjin 300459,China;Drilling Technology Research Institute,Sinopec Shengli Petroleum Engineering Co.,Ltd.,Dongying,Shandong 257000,China)
机构地区:[1]中海石油(中国)有限公司天津分公司渤海石油研究院,天津300459 [2]中国石化胜利石油工程有限公司钻井工艺研究院,山东东营257000
出 处:《石油工业技术监督》2020年第4期37-39,44,共4页Technology Supervision in Petroleum Industry
基 金:中海石油(中国)有限公司重点科技项目“稠油规模化热采有效开发技术”(编号:CNOOC-KJ135 ZDXM36 TJ04TJ)。
摘 要:油田开发过程中,套管损坏给油田造成了巨大的经济损失,需要利用套管外载计算模型对不同岩性地层进行套管抗外挤强度校核。采用弹性力学解析方法,建立了非均匀地应力作用下套管外载的计算模型,并分析了不同岩性地层条件下的套管外载。研究表明,套管所受的地应力外载比常规套管柱设计时的泥浆外载要大,在进行套管柱设计时必须考虑生产过程中由地应力产生的套管外载。在盐岩地层中套管的挤毁风险最大,页岩次之,在石灰岩地层中套管的挤毁风险最小。In the process of oilfield development,casing damage will cause huge economic losses.Therefore,it is necessary to check the anti collapse strength of casing in different lithology strata using the external load calculation model of casing.The external load calculation model of casing under the action of non-uniform crustal stress is established by using the analytical method of elastic mechanics,and the external load of casing under different lithostratigraphic conditions is analyzed.The research shows that the external load of casing produced by crustal stress is larger than that produced by mud,so the external load of casing produced by the crustal stress must be considered in the design of casing string.In salt rock formation,casing collapse risk is the largest,followed by shale,and in limestone formation,casing collapse risk is the smallest.
分 类 号:TE931.2[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.14.187.136