某通信仓储式数据中心的网架结构设计研究  

RESEARCH ON DESIGN OF GRID STRUCTURE OF A COMMUNICATION STORAGE TYPE DATA CENTER

作　　者：陈鸣飞 杨奔征 陈旭 宋国涛 CHEN Ming-fei;YANG Ben-zheng;CHEN Xu;SONG Guo-tao(China Mobile Group Design Institute Co.,Ltd.,100080,Beijing,China)

机构地区：[1]中国移动通信集团设计院有限公司,北京100080

出　　处：《建筑技术》2020年第5期615-618,共4页Architecture Technology

基　　金：中国移动通信集团重点项目(R19011010121118)。

摘　　要：利用空间结构计算软件3D3S分别建立网架结构带底部框架模型和网架结构弹性支座模型,对某通信仓储式数据中心的网架结构的承载力、刚度和关键支座节点设计研究,结果表明采用合理边界约束条件的简化模型能与整体模型取得较一致的计算结果;对通信类数据中心网架结构的设计,应重点关注抗震设防类别、网架高度、网格划分等重要参数与传统网架结构工程的区别.The spatial structure calculation software 3D3S is used to establish the frame model with bottom and elastic support model of the grid structure respectively to design the bearing capacity,stiffness and key support nodes of the grid structure of a communication storage type data center.The results show that the simplified model with the reasonable boundary constraint condition can obtain consistent calculated results with the overall model.For the design of the grid structure of communication data center,it is necessary to focus on the difference between the important parameters such as the type of seismic fortification,the height of the grid structure and the grid division.

关 键 词：通信建筑 数据中心 网架结构 

分 类 号：TU731.3[建筑科学—建筑技术科学]