异步热轧过程中轧制力的数值模拟研究  

Numerical Simulation of Rolling Force in Hot Asymmetrical Rolling Process

作　　者：赵峻 胡绪照 周玉 王可胜 谢芸芸 ZHAO Jun;HU Xu-zhao;ZHOU Yu;WANG Ke-sheng;XIE Yun-yun(School of Mechanical Engineering,Chaohu College,Chaohu,238000,Anhui)

机构地区：[1]巢湖学院机械工程学院,安徽巢湖238000

出　　处：《蚌埠学院学报》2020年第2期39-42,共4页Journal of Bengbu University

基　　金：安徽省自然科学研究重大项目(KJ2019ZD47);巢湖学院校级科学研究项目(XLY-201805,XLY-201807)。

摘　　要：采用刚塑性有限元法对异步热轧过程进行数值模拟,分析了初轧温度、压下率和异速比对轧制力的影响规律。研究结果表明:随着初轧温度的升高和异速比的增加,轧制力逐渐降低;随着压下率的增加,轧制力显著增加,峰值也较为显著。当异速比为1.00时,上、下工作辊轧制力呈对称分布;当异速比大于1.00时,上、下工作辊轧制力呈非对称分布。这种非对称性随着初轧温度的升高和异速比的增加逐渐减小;随着压下率的增加逐渐增大。The rigid plastic finite element method was used to simulate the asymmetrical hot rolling process.The effects of rolling temperature,reduction rate and speed ratio on rolling force were analyzed in this study.The results showed that the rolling force gradually decreased with the increase of rolling temperature and speed ratio;With the increase of reduction rate,the rolling force increased significantly,and the peak value was more significant.When the speed ratio is 1.00,the rolling force of the upper and lower work rolls is symmetrical;when the speed ratio is greater than 1.00,the distribution of rolling force of upper and lower work rolls is asymmetrical.With the increased of the rolling temperature and speed ratio,the fluctuation range of rolling force decreased;with the increased of reduction rate,the fluctuation range of rolling force increased.

关 键 词：异步热轧 数值模拟 轧制力 刚塑性有限元法 

分 类 号：TE976[石油与天然气工程—石油机械设备] TG146[一般工业技术—材料科学与工程]