不同工艺参数对于热锯机锯切性能的影响  

Influence of different process parameters on sawing performance for hot sawing machine

作　　者：王琛[1] 双远华[1] 王文豪 陈建勋[1] 张雨田 李潮 杨善源 Wang Chen;Shuang Yuanhua;Wang Wenhao;Chen Jianxun;Zhang Yutian;Li Chao;Yang Shanyuan(Engineering Research Center of Ministry of Education of Heavy Machinery,Taiyuan University of Seience and Technology,Taiyuan 030024,China;The Second Experimental Middle School of Liangshan County,Jining 272000,China)

机构地区：[1]太原科技大学,重型机械教育部工程研究中心,山西太原030024 [2]济宁市梁山县第二实验中学,山东济宁272000

出　　处：《锻压技术》2020年第5期133-139,158,共8页Forging & Stamping Technology

基　　金：山西省重点研发计划项目(201903D121049)。

摘　　要：采用实验测试和有限元方法对热态锯切过程进行分析,研究不同工艺参数对锯切性能的影响规律并探究规律背后的原因。根据锯齿直线运动假设对锯切过程进行分析,得出不同工艺参数对单齿锯切力、锯齿度、锯齿前刀面温度的影响规律。结果表明:单齿锯切力随着锯切线速度、预热温度的增加而下降,随着锯切深度的增加而升高;锯齿频率f随着锯切线速度、预热温度、单齿锯切深度的增加而增加;锯齿度G_S随着锯切线速度、预热温度的增加而降低,随着单齿锯切深度的增加呈上升趋势;锯齿前刀面温度峰值随着单齿锯切线速度的增加而降低,且温度峰值点距齿尖的距离减小,随着单齿锯切深度、预热温度的增加而升高,且温度峰值点距齿尖的距离增大。The hot sawing process was analyzed by the experimental test and finite element method,the influence laws of different process parameters on the sawing performance were studied,and the reasons for the influence laws were explored. Based on the assumption of sawtooth linear motion,the sawing process was analyzed,and the influence laws of different process parameters on single tooth sawing force,sawtooth degree and rake face temperature of sawtooth were obtained. The results show that the single tooth sawing force decreases with the increasing of sawing line speed and preheating temperature and increases with the increasing of sawing depth,the sawing tooth frequency f increases with the increasing of sawing line speed,preheating temperature and single tooth sawing depth,and the sawtooth degree G_S decreases with the increasing of sawing line speed and preheating temperature and increases with the increasing of single tooth sawing depth.Furthermore,the peak temperature of rake face for sawtooth decreases with the increasing of single tooth sawing line speed,and the distance of the temperature peak point from the tooth tip decreases. However,the peak temperature of rake face for sawtooth increases with the increasing of single tooth sawing depth and preheating temperature,and the distance of the temperature peak point from the tooth tip increases.

关 键 词：热锯机 锯齿度 单齿锯切力 锯齿前刀面温度 锯切线速度 

分 类 号：TF31[冶金工程—冶金机械及自动化]