检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄文豪 陶平均[1] 龙德武 张超汉 朱坤森 杨元政[1] HUANG Wenhao;TAO Pingjun;LONG Dewu;ZHANG Chaohan;ZHU Kunsen;YANG Yuanzheng(School of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China;TMD Friction Technology(Shanghai)Co.,Ltd.,Shanghai 201815,China)
机构地区:[1]广东工业大学材料与能源学院,广州510006 [2]泰明顿摩擦材料技术(上海)有限公司,上海201815
出 处:《材料导报》2020年第S01期563-566,共4页Materials Reports
基 金:广东省科技计划项目(2017B090901035,2016B090918088);广州市科技计划项目(201807010012,201704030015);清远市2019年度省科技专项资金(“大专项+任务清单”管理模式)项目(2019DZX025)。
摘 要:采用热压成型工艺法制备了一种新型低树脂基NAO(Non asbestos organic)型盘式刹车片,利用洛氏硬度仪(HRS)、定速摩擦试验机、台架试验机和扫描电子显微镜(SEM)等对样品进行表征,研究该摩擦材料的摩擦磨损性能。定速摩擦试验结果表明,该摩擦材料的衰退和恢复摩擦系数均保持在0.40左右,衰退率为-5.13%,恢复率为110.25%,抗热衰退性和恢复性能良好,磨损率较低,综合摩擦学性能优异。SEM观察发现,摩擦材料在制动摩擦过程中是由黏着磨损、切削磨损和磨粒磨损等机制共同作用的结果。台架试验进一步表明,该摩擦材料正常摩擦特征值μnom为0.404,其在不同工况条件下速度敏感性、温度和压力敏感性以及抗衰退性能良好,制动性能优异,是一种理想刹车片摩擦材料。This paper introduces a new type of NAO disc friction material with low resin content by hot pressing process.The samples were characterized by Rockwell hardness tester(HRS),constant speed friction tester,dynamometer test machine and scanning electron microscope(SEM)for the purpose of studying the friction and wear properties of the friction material.The constant-speed friction test results show that the fade and recovery friction coefficient of the friction material is maintained at about 0.40.The fade rate is-5.13%and the recovery rate is 110.25%.The material has an excellent performance in the fade resistance and recovery property aspects,and has a lower wear rate.It is exceptional in tribological performance.The SEM observation found that the friction material was the result of the combined action of adhesion wear,cutting wear and abrasive wear during the braking friction process.The dynamometer test further showed that the normal friction characteristic value(μnom)of this material was 0.404.It has good speed sensitivity,temperature and pressure sensitivity,good anti-decay performance and excellent braking performance under different working conditions.It is an ideal brake pads friction material.
分 类 号:TH117.1[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49