纳米荧光粉YPO4:2%Sm^3+水热工艺条件的优化及荧光性能  

Optimization of hydrothermal process conditions of nanometer fluorescent powder YPO4:2%Sm^3+ and fluorescence property

作　　者：吴锦绣[1,3,4] 贾恒俊 贾慧灵 李梅[1,3,4] 柳召刚 郭京[1,3] Jinxiu WU;Hengjun JIA;Huiling JIA;Mei LI;Zhaogang LIU;Jing GUO(College of Materials and Metallurgy,Inner Mongolia University of Science and Technology,Baotou,Inner Mongolia 014010,China;College of Mechanical Engineering,Inner Mongolia University of Science and Technology,Baotou,Inner Mongolia 014010,China;School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing,Beijing 100083,China;Key Laboratory of Inner Mongolia Autonomous University on New Technologies of Modern Metallurgy and Application of Rare Earth,Baotou,Inner Mongolia 014010,China)

机构地区：[1]内蒙古科技大学材料与冶金学院,内蒙古包头014010 [2]内蒙古科技大学机械工程学院,内蒙古包头014010 [3]北京科技大学冶金与生态工程学院,北京100083 [4]内蒙古自治区高校稀土现代冶金新技术与应用重点实验室,内蒙古包头014010

出　　处：《过程工程学报》2020年第5期583-590,共8页The Chinese Journal of Process Engineering

基　　金：国家自然科学基金资助项目(编号;51965053,51564040);内蒙古自治区自然科学基金[编号:2017MS(LH)0208,2018MS02016]。

摘　　要：以荧光强度为指标,采用L9(3^4)正交实验优化纳米荧光粉YPO4:2%Sm^3+的水热工艺条件(反应温度、反应时间、溶液的阴/阳离子比和pH值)。用X射线衍射仪(XRD)、扫描电镜及能谱(SEM and EDS)、荧光分光光度计(FL)、红外光谱仪(FT-IR)和紫外光谱仪(UV)等仪器对样品的组成、结构、形貌及其发光性能进行了表征和分析。结果表明,影响纳米荧光粉YPO4:2%Sm^3+水热工艺条件的主次因素为反应温度>pH值>反应时间>阴/阳离子比。最佳的水热工艺条件为反应温度为200℃、pH=3、反应时间为12 h、阴/阳离子比3:1。最佳纳米荧光粉的结构为单一的四方晶体结构,形貌为纳米球,荧光强度最大,荧光寿命为0.1719ms,禁带宽度为5.14 eV,色坐标为X=0.556 3, Y=0.433 9。In order to study the optimal hydrothermal process conditions of nano-phosphor YPO4:2%Sm^3+,using the fluorescence intensity as an indicator,the hydrothermal process conditions(reaction temperature,reaction time,the ratio of anion to cation in the solution and p H value)of the nano-phosphor YPO4:2%Sm^3+were optimized by L9(3^4)orthogonal experiment.Then,the composition,structure,morphology and luminescent property of the sample were characterized and analyzed by X-ray diffractometry(XRD),scanning electron microscopy(SEM and EDS),infrared spectrometer(FT-IR),ultraviolet spectrometer(UV)andfluorescence spectrophotometer(FL).The experimental results showed that the primary and secondary factors affecting the hydrothermal process conditions of nano-phosphor YPO4:2%Sm^3+were reaction temperature>p H value>reaction time>the ratio of anion to cation.The optimal hydrothermal process conditions of nano-phosphor YPO4:2%Sm^3+were reaction temperature of 200℃,pH=3,reaction time of 12 h,the ratio of anion to cation of 3:1.The optimum nanophosphors was a single tetragonal crystal with the morphology of nanospheres,the maximum fluorescence intensity,and fluorescence life time of 0.1719 ms,band gap of 5.14 e V,color coordinate of X=0.5563,Y=0.4339.

关 键 词：纳米荧光粉YPO4:2%Sm^3+ 水热法 工艺条件 荧光性能 

分 类 号：O482.31[理学—固体物理]