检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:田宇 杨海涛 谢佳 吴兴旺 张晨晨 刘全峰 郑莉军 赵彦珍[4] TIAN Yu;YANG Haitao;XIE Jia;WU Xingwang;ZHANG Chenchen;LIU Quanfeng;ZHENG Lijun;ZHAO Yanzhen(State Grid Anhui Electric Power Co.,Ltd.,Hefei 230000,China;State Grid Anhui Electric Power Research Institute,Hefei 230000,China;Xi’an Herong Electric Power Equipment Co.,Ltd.,Xi’an 710200,China;Xi’an Jiaotong University,Xi’an 710049,China)
机构地区:[1]国网安徽省电力有限公司,合肥230000 [2]国网安徽省电力有限公司电力科学研究院,合肥230000 [3]西安合容电力设备有限公司,西安710200 [4]西安交通大学,西安710049
出 处:《电力电容器与无功补偿》2020年第3期141-146,155,共7页Power Capacitor & Reactive Power Compensation
基 金:国网安徽省电力有限公司科技项目(主动预警关键技术研究与应用)。
摘 要:因多种类型在线监测装置供电电源的需要,提出一种具有正负输出的电流耦合取电电源装置。采用理论推导和仿真相结合的方法,研究了磁芯有无气隙对取电电源工作状态的影响;通过试验测得取电线圈副边电压随原边电流以及输出功率随原边电流和负载电阻的变化曲线,为电源设计提供依据;针对取电线圈副边输出电压高需要电气隔离,一般正负输出集成芯片难以满足要求的情况,提出采用有源钳位ZVS-PWM正激变换器作为电气隔离及降压处理电路来实现正负输出的取电电源,结合ZVS-PWM软开关技术和同步整流技术来提高电源的转换效率,并进行了仿真分析验证;设计制作了输出电压为±12 V、输出功率为1.44 W的取电电源,并获得了理想的试验效果。A kind of current coupled power supply device with positive and negative output is proposed for the need of power supply for multiple types of on line monitoring device.The method of theoretical deviation with combination of simulation is adopted to study the influence of magnetic without and without air gap on the operation condition of power supply.The variation curve secondary voltage of power supply coil with primary current and the output power with primary current and load resistance is obtained by the test so to provide the base for the power design.In view of such situation that high secondary output voltage needs electrical isolation of power supply coil and general positive and negative output integrated chips cannot meet requirement,it is proposed to adopt,active clamp ZVS-PWM forward converter as electrical isolation and voltage reduction circuit to achieve positive and negative output power supply.Power conversion efficiency is improved by the ZVS-PWM soft switching technology and synchronous rectification technology and the simulation analysis and verification are performed.The power supply with output voltage±12 V DC and output power output 1.44 W is designed and made,and ideal test result is obtained.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49