酒钢CSP热轧厚规格高强钢单边浪原因分析及控制  

Cause Analysis and Control of Single Side Wave in CSP Hot Rolled Thick Gauge High Strength Steel of Jiuquan Iron and Steel Company

作　　者：吝理平 韩久彦[1] 杨华[1] LIN Li-ping;HAN Jiu-yan;YANG Hua(Jiugang Hongxing Iron&Steel Co.Ltd.,Jiayuguan 735100,China)

机构地区：[1]酒钢集团宏兴钢铁股份有限公司,甘肃嘉峪关735100

出　　处：《甘肃冶金》2020年第3期54-56,82,共4页Gansu Metallurgy

摘　　要：针对近期市场上反馈的多起热轧高强钢带开平过程出现的带卷头尾单边浪形,分析了产生此类缺陷的主要原因,通过对厚规格侧导带头、带身、带尾的设定值进行优化,改善了板坯在头部穿带、带身轧制、尾部抛钢过程中的整体对中,有效降低了热轧高强钢厚规格带卷头尾跑偏而带来的厚度偏差,提高了产品的板形质量。This paper focuses on the single-sided waveform of coil head and tail during the flattening process of hot-rolled high strength steel strip fed back from the recent market,the main causes of such defects are analyzed.By optimizing the setting values of side guide strip head,body and tail of thick gauge,the overall alignment of slab in the process of piercing strip at the head,rolling strip body and throwing steel at the tail is improved,the thickness deviation caused by the coil end deviation of hot rolled high strength steel strip is effectively reduced,and the shape quality of the product is improved.

关 键 词：热轧 厚规格 高强钢 单边浪 厚度偏差 跑偏 

分 类 号：TG335.11[金属学及工艺—金属压力加工]