船舶管系复杂支架柔性设计方法  

Research on the Flexible Design Method of Complex Ship Piping Support

作　　者：雷洪涛 蔡乾亚[1] 张欣[1] 唐能 LEI Hongtao;CAI Qianya;ZHANG Xin;TANG Neng(Jiangnan Shipyard(Group)Co.,Ltd.,Shanghai 201913,China)

机构地区：[1]江南造船(集团)有限责任公司,上海201913

出　　处：《船舶与海洋工程》2020年第3期73-77,共5页Naval Architecture and Ocean Engineering

基　　金：国防基础科研重点项目(JCKY2017206B004)。

摘　　要：结合船舶管支架生产设计建模的特点,从设计需求、建模方法和技术实现等角度出发,梳理并提出一套完整的管支架柔性建模设计实现方法。通过开发,得到管支架柔性设计的可视化交互设计模块。通过实船应用验证该方法的有效性,结果表明,采用该方法不仅能提高管支架设计的智能化程度,而且有利于控制支架的建模质量,提升设计效率和设计水平。In considering the production design modelling characteristics of ship piping support,this paper studies the design requirement,modeling method and technology realization to summarize a complete set of flexible modeling and design method for the piping support.The visual interactive design module for the flexible design of piping support is developed.Real ship validation shows that the method not only increases the intelligent level of piping support design,but also performs well for the modeling quality control of the support,which raises the design efficiency and improves the design quality.

关 键 词：管支架 柔性设计 三维体验平台 二次开发 

分 类 号：U662[交通运输工程—船舶及航道工程]