改善羽绒服用缝纫线性能的研究  

Research on the Improvement of Sewing Thread Property for Down Jacket

作　　者：张亚婷 张淑洁[1] 羌培华 伏立松 赵学成 ZHANG Yating;ZHANG Shujie;QIANG Peihua;FU Lisong;ZHAO Xuecheng(Tiangong University,Tianjin,300387;Nantong Cellulose Fiber Co.,Ltd.,Jiangsu Nantong,226008)

机构地区：[1]天津工业大学,天津300387 [2]南通醋酸纤维有限公司,江苏南通226008

出　　处：《棉纺织技术》2020年第7期21-25,共5页Cotton Textile Technology

基　　金：国家自然科学基金项目(51303128,51403154,51303131)。

摘　　要：探讨羽绒服用缝纫线的后处理方式。将上油时过蜡片接触法与浸渍处理法进行了对比,测试了不同试验样品的含油率、动摩擦力及静摩擦力、车缝性能、细号高密面料线迹的渗油性。结果表明:采用浸渍处理法,缝纫线上油更均匀,增强了车缝性能,满足细号高密面料的防渗油要求,Siliwa BL146油剂选用质量分数4%的用量,浴液环境pH值需0.2 g/L的醋酸,最终温度55℃,保温时间10 min的处理条件较理想。认为采用浸渍处理法可有效提高缝纫线的使用性能。The aftertreatment methods of sewing threads for down jacket were discussed.Wax sheet contact process method and immersing treatment method for oiling were compared.The oil content,dynamic friction&static friction,stitching property,oiliness of fine high-density fabric stitch for different samples were tested.The test results showed that oiling with immersing treatment method was more uniform.The stitch property was enhanced.It could meet the anti-seepage oil requirement for fine high-density fabric.The dosage of Siliwa BL146 oil agent was 4%in mass fraction.0.2 g/L HAC was needed for the bath foam environment pH value.The final temperature was 55 oC.The treatment condition with soaking time of 10 min was more ideal.It is considered that the usability of sewing thread can be effectively improved by adapting immersion treatment method.

关 键 词：细号高密面料 缝纫线 防渗油性 后处理 油剂 处理工艺 缝纫性能 

分 类 号：TS101.3[轻工技术与工程—纺织工程]