检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄通柱 门正兴[2] 董卓林 王瑞林 岳太文[2] 马亚鑫 Huang Tongzhu;Men Zhengxing;Dong Zhuolin;Wang Ruilin;Yue Taiwen;Ma Yaxing
机构地区:[1]中国航发成都发动机有限公司,四川610500 [2]成都航空职业技术学院机电工程学院,四川610021
出 处:《大型铸锻件》2020年第4期4-5,14,共3页Heavy Casting and Forging
摘 要:为提高2A70铝合金接头壳体锻造的材料利用率以及锻造效率,采用有限元分析方法对方形、棒料、变直径棒料毛坯结构成形接头壳体的锻造成形过程进行了分析。结果表明:与方形毛坯相比,采用变直径棒料成形零件可以减少材料30%,成形载荷降低50%,成形后零件飞边均匀,实际生产与模拟结果一致。In order to improve the material utilization and forging efficiency of joint shell of 2A70 aluminum alloy,the finite element analysis method has been used to analyze the forging process of the square,bar,and variable diameter bar billets.The results show that,compared with the square billet,the material can be reduced by 30%,the forming load can be reduced by 50%,and the flash is uniform after forming by using the variable diameter bar billets.The actual production is consistent with the simulation results.
分 类 号:TG316[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222