检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:钱洪建 沈奎 陈焕德 Qian Hongjian;Shen Kui;Chen Huande(Jiangsu Shagang Group Co.,Ltd.,Zhangjiagang 215625,China;Institute of Research of Iron&Steel,Shasteel,Jiangsu Province,Zhangjiagang 215625,China)
机构地区:[1]江苏沙钢集团有限公司,江苏张家港215625 [2]江苏省(沙钢)钢铁研究院,江苏张家港215625
出 处:《金属制品》2020年第3期18-20,28,共4页Metal Products
摘 要:采用Gleeble-3800热模拟试验机对20CrMnMo钢的连续冷却转变动态CCT曲线进行模拟,研究了不同冷却速率对组织性能的影响,结果表明:当冷却速率小于1℃/s时,奥氏体转变产物为铁素体和珠光体,冷却速率大于3℃/s时产生马氏体组织,很好地指导了轧制工艺的制定,有利于改善盘条的加工性能。To simulate CCT curve of 20 CrMnMo steel using Gleeble-3800 thermal simulator.The effect of cooling rate on microstructure and properties was studied.Results showed that austenite transformation products was ferrite and pearlite when cooling rate was lower than 1.0℃/s,austenite transformation products was martensite when cooling rate was higher than 3.0℃/s,which can guide the establishment of rolling process and improve the processing property of wire rod.
关 键 词:20CrMnMo 热模拟 冷却速率 CCT曲线 金相组织
分 类 号:TG156.1[金属学及工艺—热处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200