检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邢延超 李泽群 丁寒雪 王孝威 杨光 XING Yan-chao;LI Ze-qun;DING Han-xue;WANG Xiao-wei;YANG Guang(School of Information and Control,Qingdao University of Technology,Qingdao 266000,China;School of Elctrical and Electronic Engineering,University of Technology Sydney,Sydney 2007,Australia)
机构地区:[1]青岛理工大学,信息与控制工程学院,山东青岛266000 [2]School of Electrical and Electronic Engineering,University of Technology Sydney,Sydney 2007,Australia
出 处:《微电子学与计算机》2020年第7期66-70,共5页Microelectronics & Computer
基 金:国家自然科学基金(61771271,61631008);山东省自然科学基金(ZR2016FP06,ZR2017MF024,ZR2018MF002);水声技术重点实验室项目(SSKF2018008)。
摘 要:针对水声信道复杂,水声正交频分复用算法高峰均功率比问题,提出了基于差分编码映射和单载波频分多址接入的低峰均功率比水声多用户通信算法.在发送端,将源码进行差分编码转化为基带符号,通过N点离散傅里叶变换将基带符号转换为频域符号,从时域上来看,每一个基带符号的数据信息会分布到对应频段上,从频域上来看,每一个频点的信息是所有基带符号在该频率值上全部频率分量;通过M点离散傅里叶反变换,将全频段的全部符号信息搬移到通频带;添加循环前缀,通过换能器发出在接收端,去除循环前綴;通过M点离散傅里叶变换将通频带的时域符号转换为基带的频域符号;再通过N点离散傅里叶反变换将频域符号转换成基带符号;最后通过差分解映射估计出源码.良好的仿真和试验结果验证了所提算法的有效性.To solve the problem of high peak-to-average power ratio caused by underwater acoustic orthogonal frequency division multiplexing algorithm in the complex underwater acoustic channel environment, a low peak-to-average power ratio underwater acoustic multiuser communication algorithm based on Differential Coding Mapping and Single-carrier Frequency Division Multiple Access(D-SC-FDMA), is proposed in this paper. On the transmitting end, the source codes are converted into baseband symbols by differential coding mapping;the baseband symbols are converted into frequency domain symbols by N-point discrete Fourier transform. From the time domain, the data information of each baseband symbol is distributed to the corresponding frequency band and from the frequency domain, the information of each frequency point is all frequency components of all baseband symbols at the frequency value. All symbolic information of the whole frequency band is transferred to the passband by M-point inverse discrete Fourier transform. The cyclic prefix is added and the symbols are transmitted through the transducer. On the receiving end, the cyclic prefix is removed;all the symbols are moved from the passband to the baseband by the M-point discrete Fourier transform;then the frequency domain symbols are converted into the baseband symbols by the N-point inverse discrete Fourier transform;finally, the source codes are estimated by differential de-mapping. Good simulation and experimental results verify the effectiveness of the proposed algorithm.
关 键 词:差分编码映射 单载波频分多址接入 峰均功率比 水声信道
分 类 号:TN929.3[电子电信—通信与信息系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.46