检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:柏朗 李言[1] 杨明顺[1] 李玉玺[1] 林允博 赵仁峰 BAI Lang;LI Yan;YANG Mingshun;LI Yuxi;LIN Yunbo;ZHAO Renfeng(School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, Shaanxi, China)
机构地区:[1]西安理工大学机械与精密仪器工程学院,陕西西安710048
出 处:《兵工学报》2020年第6期1219-1226,共8页Acta Armamentarii
基 金:国家自然科学基金项目(51475366,51805433);陕西省科技计划项目(2016JM5074)。
摘 要:在单点增量成形过程中,板料的悬空特性和制件的回弹效应使成形过程易发生失稳,制件易产生起皱和破裂等缺陷。为解决制件的悬空区失稳和回弹问题,将静压支撑和超声振动引入单点增量成形技术中进行辅助成形。以典型圆锥台为研究对象,针对制件在轴向和法向几何误差的产生机理,设计相应的静压支撑系统和超声振动系统,通过试验研究静压支撑和超声振动对工件轴向误差和形面法向误差的影响规律。结果表明:静压支撑能够降低工件轴向误差41.98%;超声振动可以降低形面法向误差84.21%.In the single point incremental forming process,the forming process is prone to instability,and the parts are prone to wrinkle and crack due to the suspended characteristics and the springback effect of sheet.In order to solve the problems of suspension region instability and springback,it is considered to introduce static pressure support and ultrasonic vibration into the single point incremental forming for auxiliary forming.The typical truncated cone is taken as the research object.The corresponding static pressure support system and ultrasonic vibration system were designed according to the mechanism of producing the geometric errors in the axial and normal directions.The effects of static pressure support and ultrasonic vibration on axial error of part and on normal error of shape surface were studied experimentsally.The results show that the static pressure support can reduce the axial error of part by 41.98%,and the ultrasonic vibration can reduce the normal error of shape surface by 84.21%.
关 键 词:成形件 几何误差 静压支撑 超声振动 单点增量成形
分 类 号:TG663[金属学及工艺—金属切削加工及机床]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30